Implemented automation projects
Implemented automation projects

Implemented automation projects

Home

Archive

Archive

09.11.2026

Gas Saving: From Theory to Practice!

This article discusses how to build an automatic control system for boiler superheated steam temperature and the gas–air ratio using modern automation equipment and technologies. The purpose of this control system is to solve today's most pressing task: saving gas and significantly reducing its consumption at facilities such as combined heat and power (CHP) plants, boiler houses and the like. The system requires low implementation costs and pays back quickly. The solution has been implemented as part of an automated system at the Kremenchuk CHP Plant of Poltavaoblenergo OJSC.

Archive

09.11.2026

Boiler Furnace Draft Control: A Modern Approach

This article discusses how to build an automatic furnace draft control system for a boiler using modern microprocessor-based automation equipment with a variable frequency drive (inverter) in the control loop. A method for a step-by-step transition from the existing system to the proposed one is described. The system can significantly reduce the power consumed by the induced-draft fan drive of a boiler unit that spends most of its time in modulating mode. The solution is intended for small and medium-capacity boiler units.

Archive

10.11.2026

Protecting GCU Service Life: Surge Warning for GTK-10

A stand-alone surge warning system can significantly improve the reliability of gas compressor units without a complete upgrade.

Archive

10.11.2026

Gas Temperature Monitoring Upstream of the HPT of a GTK-10 Gas Compressor Unit

An improved system for monitoring gas temperature upstream of the high-pressure turbine of a GTK-10 gas compressor unit gives operating personnel additional information on GCU dynamics and helps avoid emergency shutdowns.

Archive

10.11.2026

Rational Heat Power Engineering: Automating Small and Medium-Capacity Boiler Houses

Modern automation equipment makes it possible to re-equip small and medium-capacity boiler plants with quality, in stages and economically.

Archive

10.11.2026

Simple Versatility: the MIK-51 Compact Controller

The MIK-51 compact controller is used to solve complex process automation tasks at power, chemical, food and other industrial enterprises both in Ukraine and abroad.

Archive

11.11.2026

Controlled Quality: Automating Milk Pasteurization with a MIK-51 Controller

A single compact multifunctional MIK-51 programmable controller can automate a fairly complex, typical food industry process unit.

Archive

11.11.2026

Computerized Coolant Level Monitoring in the Expansion Tanks of GTK-10I Gas Compressor Units

The Speedtronic automatic control systems installed on the GTK-10I gas compressor units (GCUs) of the Soyuz pipeline in the 1970s have a number of drawbacks, including insufficient information and the use of contact-type sensors. This article describes how the Instrumentation and Control (I&C) Service of the Bohorodchany Line Production Department improved visualization and set up early-warning alarms and archiving of important process parameters using its own resources.

Archive

11.11.2026

Upgrading Recorders and Control Systems at CS-39 of the Urengoy–Pomary–Uzhhorod Pipeline

Compressor station No. 39 of the Urengoy–Pomary–Uzhhorod pipeline (Fig. 1) was commissioned in 1983. Its automation equipment, in terms of components and design, corresponds to the level of the early 1980s. Since the replacement of automatic control systems with modern ones has not yet begun at similar compressor stations of Ukrtransgaz with GTK-25I units, this article describes the technical solutions developed by the Instrumentation and Control (I&C) Service of the Bohorodchany Line Production Department to upgrade the most worn-out and obsolete automation systems.

Archive

12.11.2026

Sulori Hydropower Plant in Georgia: Automation with Microl Equipment

In early February 2009, Promenerhiia, a company from Buchach in Ukraine's Ternopil region, put the restored Sulori small hydropower plant in Georgia into operation. The plant's automation system is built with controllers and instruments made by Microl LLC.