0
0
Touch operator panels Weintek
Touch operator panels Weintek
Meters-indicators
Controllers (PID, ON/OFF)
I/O modules
I/O modules
Spark protection barrier
Spark protection barrier
Recorders and archivers
Recorders and archivers
Meters and converters of electrical network parameters
Meters and converters of electrical network parameters
Counters, timers, tachometers
Counters, timers, tachometers
Liquid level indicators and regulators
Liquid level indicators and regulators
Programmed logical controllers
Programmed logical controllers
Manual signal transmitters
Manual signal transmitters
Technological signaling devices
Technological signaling devices
Power supplies
Power supplies
Codesys PLC controllers
Codesys PLC controllers
Normalizing converters
Galvanic isolation and branching blocks
Galvanic isolation and branching blocks
Communication interface converters and amplifiers
Communication interface converters and amplifiers
Analytical instruments
Analytical instruments
Switching blocks
Switching blocks
Control and protection units
Control and protection units
GSM communication routers / modems
GSM communication routers / modems
МІК-111
МІК-111
Regulation type:
ON/OFF
Three-position
Analog PID controller
Pulse PID controller
PWM PID controller
ON/OFF
Three-position
Analog PID controller
Pulse PID controller
PWM PID controller
Number of independent regulators:
1
1
Additional features:
Signaller
Converter
Signaller
Converter
Quantity of analog inputs:
1
1
Output type:
unified: passive
thermal resistance: three-wire connection
unified: passive
thermal resistance: three-wire connection
Types of input sensors and signals:
0-5 mA, 0-20 mA, 4-20 mA
0-2 V, 0-10 V, 0-75 mV, 0-200 mV
Cu 50, Cu 100, Pt 50P, Pt 100P, Pt50, Pt100
Type: K,L,J,S,B,T,A-1
0-5 mA, 0-20 mA, 4-20 mA
0-2 V, 0-10 V, 0-75 mV, 0-200 mV
Cu 50, Cu 100, Pt 50P, Pt 100P, Pt50, Pt100
Type: K,L,J,S,B,T,A-1
Limit of the basic combined measurement error:
≤ 0.2
≤ 0.2
Рolling cycle time:
up to 0.1
up to 0.1
Galvanic isolation:
• Input isolated from other circuits.
• Input isolated from other circuits.
Switching to another sensor type:
User-configurable, calibration required
User-configurable, calibration required
Quantity of discrete inputs:
Not included
Not included
Number of outputs:
1
1
Output type:
active
active
Ranges of possible output signals:
0 to 5 mA / R ≤ 2000 Ω
0 to 20 mA / R ≤ 500 Ω
4 to 20 mA / R ≤ 500 Ω
0 to 10 V / R ≤ 2 кΩ
0 to 5 mA / R ≤ 2000 Ω
0 to 20 mA / R ≤ 500 Ω
4 to 20 mA / R ≤ 500 Ω
0 to 10 V / R ≤ 2 кΩ
The limit of the main combined error of the output signal formation:
≤ 0.2 %
≤ 0.2 %
Quantity of discrete outputs:
2
2
Types of discrete outputs:
• NPN transistor: up to 40V, 100mA
• Switching relay: up to 230V, 8A
• NPN transistor: up to 40V, 100mA
• Switching relay: up to 230V, 8A
Data exchange interface:
RS-485
RS-485
Data exchange protocol:
Modbus RTU
Modbus RTU
Indication type:
Seven-segment, digital
Seven-segment, digital
Indication accuracy:
Four categories
Four categories
Supply voltage:
Alternating current: 230 V
Direct current: 24 V
Alternating current: 230 V
Direct current: 24 V
Power consumption:
Alternating current: no more than 6.5 VA
Direct current: no more than 180 mA
Alternating current: no more than 6.5 VA
Direct current: no more than 180 mA
Availability of a built-in power supply for inputs:
Yes, optional, if specified in the order
= 24 V, 25 mА
Not included
Non-volatile memory:
Yes, EEPROM
Yes, EEPROM
Galvanic isolation:
• Full. All components of the device are isolated from each other.
• Galvanic (electrical) isolation voltage (for outputs and interface), not less than 500 V
• Full. All components of the device are isolated from each other.
• Galvanic (electrical) isolation voltage (for outputs and interface), not less than 500 V
Installation type:
Shield
DIN-rail
Case size (HxWxD):
48х96х162 mm
94х106х58 mm
Weight, not more than:
no more than 0.35 kg
no more than 0.35 kg
Degree of protection:
IP30
IP30
Ambient temperature:
-40 °C to +70 °C
-40 °C to +70 °C
