Home Meters-indicators Wood moisture meters:

Sensor Cable

КД Sensor Cable

Choose a modification:

Order code:

КД
М
cable length selection:

Number:

Available for order.

The KD sensor cable is designed to connect needle-type wood moisture sensors to the KK-8 chamber terminal block in wood drying monitoring systems. It ensures reliable signal transmission even in high-temperature and high-humidity environments.

⚙️ Technical Specifications:

Parameter:

 

Value:

 

Application

Connecting sensors to KK-8

Number of conductors

Conductor cross-section

0.5 mm²

Insulation material

Heat- and moisture-resistant (PVC, Teflon, or silicone options)

Temperature range

–20 to +120 °C

Length

Custom-made (per installation requirements)

Connection type

Terminal, soldered, with optional connector

Cable protection

Optional shielding and mechanical protection

 

✅ Features:

  • Resistant to high temperature and humidity
  • Flexible and durable for use in drying chambers
  • Provides reliable electrical connection with minimal loss
  • Length is selected according to the layout of measurement points
Seller

0

including VAT

ІВМ-16Н

КК-8

КД

ДГ

General information:

Device type:

Wood Moisture Indicator

Additional features:

Alarms

Analog input signals:

Quantity of analog inputs:

Total 16

Types of input sensors and signals:

2 channels: 0-20 mA, 4-20 mA
6 channels: Cu 50, Cu 100, Pt 50P, Pt 100P, Pt50, Pt100, group 21, group 23
8 channels: Wood moisture (Pine, Spruce, Birch, Beech, Oak, Hornbeam, Ash, Poplar, Larch)

Limit of the basic combined measurement error:

≤ 0.2 %

Рolling cycle time:

up to 0.1 seconds

Galvanic isolation:

• Input isolated from other circuits.
• Galvanic isolation voltage is not less than 500 V.

Switching to another sensor type:

User-configurable, calibration required
Switching to a different wood type does not require recalibration

Discrete input signals:

Quantity of discrete inputs:

Not included

Analog output signals:

Number of outputs:

Not included

Discrete output signals:

Quantity of discrete outputs:

2

Types of discrete outputs:

• Closing relay: up to 230V, 8A

Interfaces:

Data exchange interface:

RS-485

Data exchange protocol:

Modbus RTU
Slave

Indication:

Indication type:

Seven-segment, digital

Indication accuracy:

Four categories

Electrical data:

Supply voltage:

Alternating current: 230 V
Direct current: 24 V

Power consumption:

Alternating current: ≤ 4.4 VА
Direct current: no more than 300 mA

Availability of a built-in power supply for inputs:

Yes, humidity channels power

Non-volatile memory:

Yes, EEPROM

Galvanic isolation:

• Full. All components of the device are isolated from each other.
• Galvanic (electrical) isolation voltage (for outputs and interface), not less than 1500 V

Corps:

Installation type:

DIN-rail

Case size (HxWxD):

110х160х58 mm

Weight, not more than:

не більше 0,35 kg

Degree of protection:

IP30

Operating conditions:

Ambient temperature:

-40 °C to +70 °C