The RSU-31 device provides control of the level of liquid or bulk materials in the tank.

Functional capabilities:

• Control of the level of liquid and bulk materials using three sensors.
• Connection of a wide range of level sensors (conductometric, float, contactless switches, etc.).
• Operation in the tank filling and emptying mode.
• Manual or automatic mode of control of the electric drive of the actuator (pump, conveyor, solenoid valve, etc.).
• Alarm of emergency overflow or drainage of the tank.
• Work with liquids that differ in electrical conductivity: tap water, contaminated water, milk and food products.

The RSU-41 device provides control of the level of liquid or bulk materials in the tank.

Functional capabilities:

• Control of the level of liquid and bulk materials using four sensors.
• Connection of a wide range of level sensors (conductometric, float, contactless switches, etc.).
• Operation in the tank filling and emptying mode.
• Manual or automatic mode of control of the electric drive of the actuator (pump, conveyor, solenoid valve, etc.).
• Alarm of emergency overflow or drainage of the tank.
• Work with liquids that differ in electrical conductivity: tap water, contaminated water, milk and food products.

The conductometric level sensor-holder is designed to signal the level of conductive liquids (water, milk, food products - weakly acidic, alkaline, etc.). The principle of operation of the sensors is based on the change in electrical conductivity between the common and signal electrodes depending on the level of the liquid being signaled.

Distinctive features:

• Sensor-holder for one electrode.
• Suitable for monitoring liquid levels under pressure up to 12 bar.
• Operating temperature up to 100 °C.
• Material of the electrodes* of the sensor: stainless steel 12X18N10T.

* The length of the electrode can be arbitrary, and is specified when ordering.

The conductometric level sensor-holder is designed to signal the level of conductive liquids (water, milk, food products - weakly acidic, alkaline, etc.). The principle of operation of the sensors is based on the change in electrical conductivity between the common and signal electrodes depending on the level of the liquid being signaled.

Distinctive features:

• Three-electrode sensor holder.
• Suitable for liquid level control without pressure.
• Operating temperature up to 130 °C.
• Sensor electrode material*: stainless steel 12X18H10T.

* The length of the electrode can be arbitrary, and is specified when ordering.

The conductometric level sensor-holder is designed to signal the level of conductive liquids (water, milk, food products - weakly acidic, alkaline, etc.). The principle of operation of the sensors is based on the change in electrical conductivity between the common and signal electrodes depending on the level of the liquid being signaled.

Distinctive features:

• Sensor-holder for one electrode.
• Suitable for liquid level control without pressure.
• Operating temperature up to 100 °C.
• Material of the electrodes* of the sensor: stainless steel 12X18N10T.

* The length of the electrode can be arbitrary, and is specified when ordering.