Touch operator panels Weintek
I/O modules
Spark protection barrier
Recorders and archivers
Meters and converters of electrical network parameters
Counters, timers, tachometers
Liquid level indicators and regulators
Programmed logical controllers
Manual signal transmitters
Technological signaling devices
Power supplies
Codesys PLC controllers
Galvanic isolation and branching blocks
Communication interface converters and amplifiers
Analytical instruments
Switching blocks
Control and protection units
GSM communication routers / modems
- Interface conversion block RS-422
BPI-55
BPI-552
Operating modes:
RealCOM - virtual COM port
Transformer: RS-232 to RS-485
Interface type 1:
USB
RS-232C
Maximum data transfer rate:
12 Mbps
from 2400 to 115200 bps
Maximum length of communication line, m:
3
15
Maximum number of devices, pcs:
1
1
Interface type 2:
RS-232С
RS-422/RS-423
RS-485
Maximum data transfer rate:
from 2400 to 115200 bps
RS-422, RS-422A: 10000 kbit/s
RS-423: 100 kbit/s
RS-485: up to 115200 bps
Maximum length of communication line, m:
up to 15m
RS-422, RS-422A : up to 1200m, at a speed of 90 kbit/s
RS-423: up to 1200m, at a speed of 1 kbit/s
RS-485: up to 1200m, at a speed of 9600 bps
Maximum number of devices, pcs:
1
1
Line type:
four-wire
FullDuplex (RxD, TxD, RTS, CTS)
two-wire
four-wire
Supply voltage:
from USB
Direct current: 24 V
Alternating current 230 V
Power consumption:
no more than 65 mA
Direct current: no more than 60 mA
Alternating current: no more than 2VA
Galvanic isolation:
• Full. All components of the device are isolated from each other.
• Galvanic isolation voltage is not less than 500 V.
• Full. All components of the device are isolated from each other.
• Galvanic isolation voltage is not less than 500 V.
Installation type:
on DIN rail
on DIN rail
Case size (HxWxD):
76х26х115 mm
76х26х115 mm
Weight, not more than:
0,13 kg
0,13 kg
Degree of protection:
IP30
IP30
Ambient temperature:
-40 °C to +70 °C
-40 °C to +70 °C