ІТМ-310A Indicator - measuring device for technological parameters

All characteristics

Only differences

ІТМ-310

ІТМ-310A

ІТМ-311

ІТМ-311В

General information:

Device type:

Technological indicator

Additional features:

Input signal conversion
Alarms
Integration

Analog input signals:Quantity of analog inputs:
1
1
1
1
Types of input sensors and signals:
0-5 mA, 0-20 mA, 4-20 mA, -5-5 mA, -20-20 mA 
 0-10 V, 0-100 mV, -10-10 V, -100-100 mV 
 Cu 50, Cu 100, Pt 50P, Pt 100P, Pt50, Pt100, Pt500, Pt1000 
 Type: K,L,N,J,S,R,B,T,E,A-1, A-2, A-3 
 0-150 Ohm, 0-300 Ohm, 0-1200 Ohm, 0-2500 Ohm 
 NTC (0-1 kΩ, 0-3 kΩ, 0-5 kΩ, 0-10 kΩ)
0-5 mA, 0-20 mA, 4-20 mA, -5-5 mA, -20-20 mA 
 0-10 V, 0-100 mV, -10-10 V, -100-100 mV 
 Cu 50, Cu 100, Pt 50P, Pt 100P, Pt50, Pt100, Pt500, Pt1000 
 Type: K,L,N,J,S,R,B,T,E,A-1, A-2, A-3 
 0-150 Ohm, 0-300 Ohm, 0-1200 Ohm, 0-2500 Ohm 
 NTC (0-1 kΩ, 0-3 kΩ, 0-5 kΩ, 0-10 kΩ)
0-5 mA, 0-20 mA, 4-20 mA, -5-5 mA, -20-20 mA 
 0-10 V, 0-100 mV, -10-10 V, -100-100 mV 
 Cu 50, Cu 100, Pt 50P, Pt 100P, Pt50, Pt100, Pt500, Pt1000 
 Type: K,L,N,J,S,R,B,T,E,A-1, A-2, A-3 
 0-150 Ohm, 0-300 Ohm, 0-1200 Ohm, 0-2500 Ohm 
 NTC (0-1 kΩ, 0-3 kΩ, 0-5 kΩ, 0-10 kΩ)
0-5 mA, 0-20 mA, 4-20 mA, -5-5 mA, -20-20 mA 
 0-10 V, 0-100 mV, -10-10 V, -100-100 mV 
 Cu 50, Cu 100, Pt 50P, Pt 100P, Pt50, Pt100, Pt500, Pt1000 
 Type: K,L,N,J,S,R,B,T,E,A-1, A-2, A-3 
 0-150 Ohm, 0-300 Ohm, 0-1200 Ohm, 0-2500 Ohm 
 NTC (0-1 kΩ, 0-3 kΩ, 0-5 kΩ, 0-10 kΩ)
Limit of the basic combined measurement error:
≤ 0.2 %
 ≤ 0.4 % (when switching to another sensor type, without calibration)
≤ 0.2 %
 ≤ 0.4 % (when switching to another sensor type, without calibration)
≤ 0.2 %
 ≤ 0.4 % (when switching to another sensor type, without calibration)
≤ 0.2 %
 ≤ 0.4 % (when switching to another sensor type, without calibration)
Рolling cycle time:
up to 0.1  seconds
up to 0.1  seconds
up to 0.1  seconds
up to 0.1  seconds
Galvanic isolation:
• Input isolated from other circuits. 
• Galvanic isolation voltage is not less than 500 V.
• Input isolated from other circuits. 
• Galvanic isolation voltage is not less than 500 V.
• Input isolated from other circuits. 
• Galvanic isolation voltage is not less than 500 V.
• Input isolated from other circuits. 
• Galvanic isolation voltage is not less than 500 V.
Switching to another sensor type:
User-selectable sensor type switching. No calibration required.
User-selectable sensor type switching. No calibration required.
User-selectable sensor type switching. No calibration required.
User-selectable sensor type switching. No calibration required.

Discrete input signals:

Quantity of discrete inputs:

Trigger signal levels:

• Logical "0" signal - DISABLED state: 0-7 V
• Logical "1" signal - ON state 18-30 V

Input consumption:

≤ 10 mА

Analog output signals:

Number of outputs:

1 (option)

Output type:

active

Ranges of possible output signals:

0 to 5 mA / R ≤ 2000 Ω
0 to 20 mA / R ≤ 500 Ω
4 to 20 mA / R ≤ 500 Ω
0 to 10 V / R ≤ 2 кΩ

The limit of the main combined error of the output signal formation:

≤ 0.2 %

Discrete output signals:

Quantity of discrete outputs:

2 (optional)
4 (optional)

Types of discrete outputs:

• NPN transistor: up to 40V, 100mA
• Switching relay: up to 230V, 8A (subject to order 2P)
• Closing relays: up to 230V, 5A (subject to ordering 4P)

Interfaces:

Data exchange interface:

RS-485
USB

Data exchange protocol:

Modbus RTU

Indication:

Indication type:

Seven-segment, digital

Seven-segment, digital
Linear indicator, bar graph

Indication accuracy:

Four categories

6-digit display

Four categories

Electrical data:Supply voltage:
Alternating current: 230 V 
 Direct current:  24 V
Alternating current: 230 V 
 Direct current:  24 V
Alternating current: 230 V 
 Direct current:  24 V
Alternating current: 230 V 
 Direct current:  24 V
Power consumption:
Direct current: no more than 200 mA 
Alternating current: no more than 4 VA
Direct current: no more than 200 mA 
Alternating current: no more than 4 VA
Direct current: no more than 250 mA 
Alternating current: no more than 4 VA
Direct current: no more than 250 mA 
Alternating current: no more than 4 VA
Availability of a built-in power supply for inputs:
Yes, optional, if specified in the order 
 = 24 V, 25 mА
Yes, optional, if specified in the order 
 = 24 V, 25 mА
Yes, optional, if specified in the order 
 = 24 V, 25 mА
Yes, optional, if specified in the order 
 = 24 V, 25 mА
Non-volatile memory:
Yes, EEPROM
Yes, EEPROM
Yes, EEPROM
Yes, EEPROM
Galvanic isolation:
• Full. All components of the device are isolated from each other. 
• Galvanic (electrical) isolation voltage (for outputs and interface), not less than 500 V
• Full. All components of the device are isolated from each other. 
• Galvanic (electrical) isolation voltage (for outputs and interface), not less than 500 V
• Full. All components of the device are isolated from each other. 
• Galvanic (electrical) isolation voltage (for outputs and interface), not less than 500 V
• Full. All components of the device are isolated from each other. 
• Galvanic (electrical) isolation voltage (for outputs and interface), not less than 500 V

Corps:

Installation type:

Shield

Case size (HxWxD):

48х96х106 mm

96х48х106 mm

Weight, not more than:

не більше 0,25 kg

Degree of protection:

IP30

Operating conditions:

Ambient temperature:

-40 °C to +70 °C

Sale Division

Department of Technical Support

Guarantee repair department

Touch operator panels Weintek

Meters-indicators

Controllers (PID, ON/OFF)

I/O modules

Spark protection barrier

Recorders and archivers

Meters and converters of electrical network parameters

Counters, timers, tachometers

Liquid level indicators and regulators

Programmed logical controllers

Manual signal transmitters

Technological signaling devices

Power supplies

Codesys PLC controllers

Normalizing converters

Galvanic isolation and branching blocks

Communication interface converters and amplifiers

Analytical instruments

Switching blocks

Control and protection units

GSM communication routers / modems

ІТМ-310A Indicator - measuring device for technological parameters

ІТМ-310A

AA

Input Signal Type:

01

02

03

04

05

06

07

08

09

10

11

12

13

14

15

16

17

18

19

20

21

22

23

24

25

26

27

28

29

30

31

32

33

34

35

36

Ga

Power Supply for Passive Sensors 0(4)-20mA:

0

1

CC

Analog Output Signal Code:

00

01

02

03

04

DD

Discrete Output Signal Code:

00

2T

2Р