0
0
Touch operator panels Weintek
Touch operator panels Weintek
Meters-indicators
Controllers (PID, ON/OFF)
I/O modules
I/O modules
Spark protection barrier
Spark protection barrier
Recorders and archivers
Recorders and archivers
Meters and converters of electrical network parameters
Meters and converters of electrical network parameters
Counters, timers, tachometers
Counters, timers, tachometers
Liquid level indicators and regulators
Liquid level indicators and regulators
Programmed logical controllers
Programmed logical controllers
Manual signal transmitters
Manual signal transmitters
Technological signaling devices
Technological signaling devices
Power supplies
Power supplies
Codesys PLC controllers
Codesys PLC controllers
Normalizing converters
Galvanic isolation and branching blocks
Galvanic isolation and branching blocks
Communication interface converters and amplifiers
Communication interface converters and amplifiers
Analytical instruments
Analytical instruments
Switching blocks
Switching blocks
Control and protection units
Control and protection units
GSM communication routers / modems
GSM communication routers / modems
BPVІ-1
BPVІ-10
Quantity inputs:
1
1
Input type:
Four-wire connection
Four-wire connection
Ranges of possible input signals:
0-10 mH
-10 - 0 - +10 mH
0-10 mH
-10 - 0 - +10 mH
Limit of the basic combined measurement error:
± 0,25 %
± 0,25 %
Measurement and conversion period:
0,01 second
0,01 second
Number of outputs:
1
1
Output type:
active
active
Ranges of possible output signals:
0 to 5 mA / R = 2000 Ohm
0 to 20 mA / R ≤ 500 Ohm
4 to 20 mA / R ≤ 500 Ohm
0 to 10 V / R ≥ 2000 Ohm
0 to 5 mA / R = 2000 Ohm
0 to 20 mA / R ≤ 500 Ohm
4 to 20 mA / R ≤ 500 Ohm
0 to 10 V / R ≥ 2000 Ohm
Availability of discrete outputs:
No
Yes
Quantity of discrete outputs:
not included
two
Types of discrete outputs:
not included
• Transistor OK: up to 40V, 100mA
• Switching relay: up to 230V, 8A
Data exchange interface:
not included
RS-485
Data exchange protocol:
not included
Modbus RTU
Digital display:
No
Seven-segment
Supply voltage:
Direct current: 24 V
Alternating current: 230 V
Direct current: 24 V
Alternating current: 230 V
Power consumption:
Direct current: no more than 120 mA
Alternating current: no more than 5 VA
Direct current: no more than 200 mA
Alternating current: no more than 6 VA
Non-volatile memory:
not included
not included
Galvanic isolation:
• Full. All components of the device are isolated from each other.
• Galvanic isolation voltage is not less than 500 V.
• Full. All components of the device are isolated from each other.
• Galvanic isolation voltage is not less than 500 V.
Installation type:
on DIN rail
on DIN rail
Case size (HxWxD):
96х100х110 mm
96х100х110 mm
Weight, not more than:
0,5 kg
0,5 kg
Degree of protection:
IP30
IP30
Ambient temperature:
-40 °C to +70 °C
-40 °C to +70 °C
