0
0
Touch operator panels Weintek
Touch operator panels Weintek
Meters-indicators
Controllers (PID, ON/OFF)
I/O modules
I/O modules
Spark protection barrier
Spark protection barrier
Recorders and archivers
Recorders and archivers
Meters and converters of electrical network parameters
Meters and converters of electrical network parameters
Counters, timers, tachometers
Counters, timers, tachometers
Liquid level indicators and regulators
Liquid level indicators and regulators
Programmed logical controllers
Programmed logical controllers
Manual signal transmitters
Manual signal transmitters
Technological signaling devices
Technological signaling devices
Power supplies
Power supplies
Codesys PLC controllers
Codesys PLC controllers
Normalizing converters
Galvanic isolation and branching blocks
Galvanic isolation and branching blocks
Communication interface converters and amplifiers
Communication interface converters and amplifiers
Analytical instruments
Analytical instruments
Switching blocks
Switching blocks
Control and protection units
Control and protection units
GSM communication routers / modems
GSM communication routers / modems
RIO-DIO16
RIO-5N-DI8-DO8
RIO-mini DI4DO4
Quantity of discrete inputs:
8
8
4
Maximum pulse frequency:
5 Hz
5 Hz
20 kHz
Input current (input consumption), no more:
=24V, ≤10 mА
=24V, ≤10 mА
=24V, ≤10 mА
Trigger signal levels:
Logical "0" signal – "DISABLED" state: 0-7V
Сигнал логічної "1" – стан "УВІМКНЕНО": 18-30V
Logical "0" signal – "DISABLED" state: 0-7V
Сигнал логічної "1" – стан "УВІМКНЕНО": 18-30V
Logical "0" signal – "DISABLED" state: 0-7V
Сигнал логічної "1" – стан "УВІМКНЕНО": 18-30V
Connectable sensors:
• Switching devices (contacts of buttons, switches, reed switches, relays, etc.)
• n-p-n-type with open collector output
• Switching devices (contacts of buttons, switches, reed switches, relays, etc.)
• n-p-n-type with open collector output
• p-n-p-type
• Switching devices (contacts of buttons, switches, reed switches, relays, etc.)
• n-p-n-type with open collector output
• p-n-p-type
Quantity of discrete outputs:
8
8
4
Output types:
• NPN transistor: up to 40V, 100mA
• Mechanical relay: 230V, 5A
• NPN transistor: up to 40V, 100mA
• Mechanical relay: 230V, 5A
• Solid-state (non-mechanical) relay: 40 V, up to 0.5 A (AC/DC)
• NPN transistor: up to 40V, 100mA
• Mechanical relay: 230V, 5A
• Solid-state (non-mechanical) relay: 40 V, up to 0.5 A (AC/DC)
Load type:
Active
Inductive
Active
Inductive
Active
Inductive
Data exchange interface:
RS-485
RS-485
RS-485
USB
Data exchange protocol:
Modbus RTU
Modbus RTU
Modbus RTU
Supply voltage:
Direct current: 24 V
Direct current: 24 V
Alternating current: 230 V
Direct current: 24 V
Alternating current: 230 V
Power consumption:
Direct current: no more than 130 mA
Direct current: 130mA
Alternating current: no more than: 3.5 ВА
Direct current: 60mA
Alternating current: no more than: 1.5 ВА
Availability of a built-in power supply for inputs:
Yes (one source per group of 8 inputs), 24V, ≤ 40 mA
Yes (one per group of 8 inputs), 24V, ≤ 40 mA
Yes, =24V, 30mA
Galvanic isolation:
• The inputs are connected in a group and galvanically isolated from other inputs and other circuits.
• The interface is galvanically isolated from inputs and other circuits.
• Galvanic isolation voltage is not less than 500 V.
• The inputs are connected in a group and galvanically isolated from other inputs and other circuits.
• The interface is galvanically isolated from inputs and other circuits.
• Galvanic isolation voltage is not less than 500 V.
• Combined. Inputs have group isolation. Outputs, interface and power are isolated from other nodes and from each other.
• The interface is galvanically isolated from inputs and other circuits.
• Galvanic isolation voltage is not less than 500 V.
Installation type:
DIN rail
DIN rail
DIN rail
Case size (HxWxD):
117х23х129 mm
132х128х57 mm
100х55х60 mm
Weight, not more than:
0,18 kg
0,18 kg
0,35 kg
Degree of protection:
IP20
IP20
IP20
Ambient temperature:
-40 °C to +70 °C
-40 °C to +70 °C
-40 °C to +70 °C
