МІК-322-К7 Dual-channel microprocessor PID controller

About the company

How to place an order?Warranty and service Delivery About Contacts Dealers Our Clients Declarations

Support

Industry solutions Operating instructions Information on Weintek Software Calibration methods

Home Controllers (PID, ON/OFF) Two-channel PID controllers:

Dual-channel microprocessor PID controller

from

11 556 ₴

including VAT

Choose a modification and complete your order code

All characteristics

Only differences

МІК-322-К7

МІК-122

МІК-122Н

General information:

Regulation type:

ON/OFF
Three-position
Analog PID controller
Pulse PID controller
PWM PID controller
Synchronous PID control of two circuits

ON/OFF
Three-position
Analog PID controller
Pulse PID controller
PWM PID controller

Number of independent regulators:

Additional features:

Auto-tuning
Signaller
Converter
Mathematical functions

Signaller
Converter

Analog input signals:Quantity of analog inputs:
2
2
2
Output type:
unified: passive 
thermal resistance: three-wire connection
unified: passive 
thermal resistance: three-wire connection
unified: passive 
thermal resistance: three-wire connection
Types of input sensors and signals:
0-5 mA, 0-20 mA, 4-20 mA, -5-5 mA, -20-20 mA 
 0-10 V, 0-100 mV, -10-10 V, -100-100 mV 
 Cu 50, Cu 100, Pt 50P, Pt 100P, Pt50, Pt100, Pt500, Pt1000 
 Type: K,L,N,J,S,R,B,T,E,A-1, A-2, A-3, A, C 
 0-150 Ohm, 0-300 Ohm, 0-1200 Ohm, 0-2500 Ohm
0-5 mA, 0-20 mA, 4-20 mA 
 0-2 V, 0-10 V, 0-75 mV, 0-200 mV 
 Cu 50, Cu 100, Pt 50P, Pt 100P, Pt50, Pt100, Pt500, Pt1000 
 Type: K,L,J,S,B,T,A-1 
 0-1000 Ohm
0-5 mA, 0-20 mA, 4-20 mA 
 0-2 V, 0-10 V, 0-75 mV, 0-200 mV 
 Cu 50, Cu 100, Pt 50P, Pt 100P, Pt50, Pt100 
 Type: K,L,J,S,B,T,A-1
Limit of the basic combined measurement error:
≤ 0.2 
 ≤ 0.4 % (when switching to another sensor type, without calibration)
≤ 0.2
≤ 0.2
Рolling cycle time:
up to 0.1
up to 0.1
up to 0.1
Galvanic isolation:
• Input isolated from other circuits.
• Input isolated from other circuits.
• Input isolated from other circuits.
Switching to another sensor type:
User-selectable sensor type switching. No calibration required.
User-configurable, calibration required
User-configurable, calibration required

Discrete input signals:

Quantity of discrete inputs:

Trigger signal levels:

• Logical "0" signal - DISABLED state: 0-7 V
• Logical "1" signal - ON state 18-30 V

• Logical "0" signal - DISABLED state: 0-7 V
• Logical "1" signal - ON state: 18-30 V

• Logical "0" signal - DISABLED state: 0-7 V
• Logical "1" signal - ON state 18-30 V

Input consumption:

≤ 10 mА

Analog output signals:

Number of outputs:

2 (option)

Output type:

active

Ranges of possible output signals:

0 to 5 mA / R ≤ 2000 Ω
0 to 20 mA / R ≤ 500 Ω
4 to 20 mA / R ≤ 500 Ω
0 to 10 V / R ≤ 2 кΩ

The limit of the main combined error of the output signal formation:

≤ 0.2 %

Discrete output signals:

Quantity of discrete outputs:

up to 6

Types of discrete outputs:

• NPN transistor: up to 40V, 100mA
• Closing relays: up to 230V, 5A (subject to ordering 4P)
• Switching relay: up to 230V, 8A (up to 2)

• NPN transistor: up to 40V, 100mA
• Switching relay: up to 230V, 8A
• Opto-symistor: up to 300V, 0.7A

• NPN transistor: up to 40V, 100mA
• Switching relay: up to 230V, 8A

Interfaces:

Data exchange interface:

RS-485
USB

RS-485

Data exchange protocol:

Modbus RTU

Indication:

Indication type:

Seven-segment, digital

Indication accuracy:

Four categories

Electrical data:Supply voltage:
Alternating current: 230 V 
 Direct current:  24 V
Alternating current: 230 V 
 Direct current:  24 V
Alternating current: 230 V 
 Direct current:  24 V
Power consumption:
Alternating current: no more than 7.0 VA 
Direct current: no more than 350 mA
Alternating current: no more than 8.3 VA 
Direct current: no more than 350 mA
Alternating current: no more than 7.0 VA 
Direct current: no more than 250 mA
Availability of a built-in power supply for inputs:
Yes, optional, if specified in the order 
 = 24 V, 25 mА
Yes, optional, if specified in the order 
 = 24 V, 25 mА
Yes, optional, if specified in the order 
 = 24 V, 25 mА
Non-volatile memory:
Yes, EEPROM
Yes, EEPROM
Yes, EEPROM
Galvanic isolation:
• Full. All components of the device are isolated from each other. 
• Galvanic (electrical) isolation voltage (for outputs and interface), not less than 500 V
• Full. All components of the device are isolated from each other. 
• Galvanic (electrical) isolation voltage (for outputs and interface), not less than 500 V
• Full. All components of the device are isolated from each other. 
• Galvanic (electrical) isolation voltage (for outputs and interface), not less than 500 V

Corps:

Installation type:

Shield

DIN-rail

Case size (HxWxD):

96х96х135 mm

110х160х58 mm

Weight, not more than:

no more than 0.6 kg

no more than 0.35 kg

no more than 0.5 kg

Degree of protection:

IP30

Operating conditions:

Ambient temperature:

-40 °C to +70 °C

Sale Division

Department of Technical Support

Guarantee repair department

Touch operator panels Weintek

Meters-indicators

Controllers (PID, ON/OFF)

I/O modules

Spark protection barrier

Recorders and archivers

Meters and converters of electrical network parameters

Counters, timers, tachometers

Liquid level indicators and regulators

Programmed logical controllers

Manual signal transmitters

Technological signaling devices

Power supplies

Codesys PLC controllers

Normalizing converters

Galvanic isolation and branching blocks

Communication interface converters and amplifiers

Analytical instruments

Switching blocks

Control and protection units

GSM communication routers / modems

МІК-322-К7 Dual-channel microprocessor PID controller

МІК-322-К7

AA

Type of first input signal:

01

02

03

04

05

06

07

08

09

10

11

12

13

14

15

16

17

18

19

20

21

22

23

24

25

26

27

28

29

30

31

32

33

ВВ

Type of second input signal:

01

02

03

04

05

06

07

08

09

10

11

12

13

14

15

16

17