0
0
Touch operator panels Weintek
Touch operator panels Weintek
Meters-indicators
Controllers (PID, ON/OFF)
I/O modules
I/O modules
Spark protection barrier
Spark protection barrier
Recorders and archivers
Recorders and archivers
Meters and converters of electrical network parameters
Meters and converters of electrical network parameters
Counters, timers, tachometers
Counters, timers, tachometers
Liquid level indicators and regulators
Liquid level indicators and regulators
Programmed logical controllers
Programmed logical controllers
Manual signal transmitters
Manual signal transmitters
Technological signaling devices
Technological signaling devices
Power supplies
Power supplies
Codesys PLC controllers
Codesys PLC controllers
Normalizing converters
Galvanic isolation and branching blocks
Galvanic isolation and branching blocks
Communication interface converters and amplifiers
Communication interface converters and amplifiers
Analytical instruments
Analytical instruments
Switching blocks
Switching blocks
Control and protection units
Control and protection units
GSM communication routers / modems
GSM communication routers / modems
- Thermoresistance signal conversion unit, dual-channel, current loop power supply
BPO-132
BPO-432
Quantity inputs:
2
2
Input type:
Three-wire connection:
Three-wire connection:
Ranges of possible input signals:
Cu 50, Cu 100, Pt 50P, Pt 100P, Pt50, Pt50, Pt100
Cu 50, Cu 100, Pt 50P, Pt 100P, Pt50, Pt50, Pt100
Limit of the basic combined measurement error:
± 0,25 %
± 0,25 %
Measurement and conversion period:
0,01 second
0,01 second
Number of outputs:
2
2
Output type:
active
passive, current loop
Ranges of possible output signals:
0 to 5 mA / R = 2000 Ohm
0 to 20 mA / R ≤ 500 Ohm
4 to 20 mA / R ≤ 500 Ohm
0 to 10 V / R ≥ 10000 Ohm
4 to 20 mA / R ≤ 500 Ohm
Availability of discrete outputs:
No
No
Quantity of discrete outputs:
not included
not included
Types of discrete outputs:
not included
not included
Data exchange interface:
not included
not included
Data exchange protocol:
not included
not included
Digital display:
No
No
Supply voltage:
Direct current: 24 V
Current loop, 24V
Power consumption:
Direct current: no more than 110 mA
no more than 20 mA (channel)
Non-volatile memory:
not included
not included
Galvanic isolation:
• Inputs and outputs are not isolated from each other, but isolated from the power supply circuit
• Galvanic isolation voltage is not less than 500 V.
• The channels are isolated from each other. The input is not isolated from the output.
• Galvanic isolation voltage is not less than 500 V.
Installation type:
on DIN rail
on DIN rail
Case size (HxWxD):
76х26х115 mm
76х26х115
Weight, not more than:
0,1 kg
0,13 kg
Degree of protection:
IP20
IP20
Ambient temperature:
-40 °C to +70 °C
-40 °C to +70 °C
