0
0
Touch operator panels Weintek
Touch operator panels Weintek
Meters-indicators
Controllers (PID, ON/OFF)
I/O modules
I/O modules
Spark protection barrier
Spark protection barrier
Recorders and archivers
Recorders and archivers
Meters and converters of electrical network parameters
Meters and converters of electrical network parameters
Counters, timers, tachometers
Counters, timers, tachometers
Liquid level indicators and regulators
Liquid level indicators and regulators
Programmed logical controllers
Programmed logical controllers
Manual signal transmitters
Manual signal transmitters
Technological signaling devices
Technological signaling devices
Power supplies
Power supplies
Codesys PLC controllers
Codesys PLC controllers
Normalizing converters
Galvanic isolation and branching blocks
Galvanic isolation and branching blocks
Communication interface converters and amplifiers
Communication interface converters and amplifiers
Analytical instruments
Analytical instruments
Switching blocks
Switching blocks
Control and protection units
Control and protection units
GSM communication routers / modems
GSM communication routers / modems
- Programmable logic controller
МІК-51
МІК-51Н
МІК-52
МІК-52Н
МІК-53Н
Expansion module:
Supported
Supported
Supported
Supported
Not supported
Number of expansion modules:
1
1
1
1
Not supported
Expansion module models:
МР-52-01: 8 discrete inputs
МР-52-03: 8 discrete outputs
МР-52-04: 8 discrete inputs and 1 analog output
МР-52-06: 8 discrete outputs and 1 analog output
МР-52-07: 3 analog outputs
МР-52-11: 16 discrete inputs
МР-52-12: 8 discrete inputs and 8 discrete outputs
МР-52-13: 8 discrete inputs, 8 discrete outputs and 1 analog output
МР-52-15: 16 discrete outputs and 1 analog output
МР-52-30: 32 discrete inputs
МР-52-31: 24 discrete inputs and 8 discrete outputs
МР-52-32: 16 discrete inputs and 16 discrete outputs
МР-52-33: 8 discrete inputs and 24 discrete outputs
МР-52-34: 32 discrete outputs
МР-51Н-11: 16 discrete inputs
МР-51Н-13: 8 discrete inputs, 8 discrete outputs and 1 analog output
МР-51Н-15: 16 discrete outputs and 1 analog output
МР-51Н-16: 16 discrete inputs and 3 analog outputs
МР-51Н-17: 8 discrete inputs, 8 discrete outputs and 3 analog outputs
МР-51Н-18: 16 discrete outputs and 3 analog outputs
МР-51Н-30: 32 discrete inputs
МР-51Н-31: 24 discrete inputs and 8 discrete outputs
МР-51Н-32: 16 discrete inputs and 16 discrete outputs
МР-51Н-33: 8 discrete inputs and 24 discrete outputs
МР-51Н-34: 32 discrete outputs
МР-52-01: 8 discrete inputs
МР-52-03: 8 discrete outputs
МР-52-04: 8 discrete inputs and 1 analog output
МР-52-06: 8 discrete outputs and 1 analog output
МР-52-07: 3 analog outputs
МР-52-11: 16 discrete inputs
МР-52-12: 8 discrete inputs and 8 discrete outputs
МР-52-13: 8 discrete inputs, 8 discrete outputs and 1 analog output
МР-52-15: 16 discrete outputs and 1 analog output
МР-52-30: 32 discrete inputs
МР-52-31: 24 discrete inputs and 8 discrete outputs
МР-52-32: 16 discrete inputs and 16 discrete outputs
МР-52-33: 8 discrete inputs and 24 discrete outputs
МР-52-34: 32 discrete outputs
МР-51Н-11: 16 discrete inputs
МР-51Н-13: 8 discrete inputs, 8 discrete outputs and 1 analog output
МР-51Н-15: 16 discrete outputs and 1 analog output
МР-51Н-16: 16 discrete inputs and 3 analog outputs
МР-51Н-17: 8 discrete inputs, 8 discrete outputs and 3 analog outputs
МР-51Н-18: 16 discrete outputs and 3 analog outputs
МР-51Н-30: 32 discrete inputs
МР-51Н-31: 24 discrete inputs and 8 discrete outputs
МР-51Н-32: 16 discrete inputs and 16 discrete outputs
МР-51Н-33: 8 discrete inputs and 24 discrete outputs
МР-51Н-34: 32 discrete outputs
Not supported
Quantity of analog inputs:
4
4
8
4
• models 31-33: Not included
• models 21-24: 2
• models 41-42: 4
Types of input sensors and signals:
0-5mА, 0(4)-20mА, 0-10V
0-50mВ, 0-200mВ, 0-1V
Pt(50P, 100P, gr21, Pt50, Pt100, Pt500, Pt1000), Cu(50, 100, гр.23)
Type L, Type K, Type S, Type B, Type A, Type J, Type E
0-5mА, 0(4)-20mА, 0-10V
0-50mВ, 0-200mВ, 0-1V
Pt(50P, 100P, gr21, Pt50, Pt100), Cu(50, 100, гр.23)
Type L, Type K, Type S, Type B, Type A, Type J, Type E
0-5mА, 0(4)-20mА, 0-10V
0-5mА, 0(4)-20mА, 0-10V
0-5mА, 0(4)-20mА, 0-10V
Limit of the basic combined measurement error:
± 0,2 %
± 0,2 %
± 0,2 %
± 0,2 %
± 0,2 %
Рolling cycle time:
0.1 second
0.1 second
0.1 second
0.1 second
0.1 second
Galvanic isolation:
• Full. The input is isolated from other circuits.
• Galvanic isolation voltage is not less than 500 V.
• Full. The input is isolated from other circuits.
• Galvanic isolation voltage is not less than 500 V.
• Full. The input is isolated from other circuits.
• Galvanic isolation voltage is not less than 500 V.
• Full. The input is isolated from other circuits.
• Galvanic isolation voltage is not less than 500 V.
• Full. The input is isolated from other circuits.
• Galvanic isolation voltage is not less than 500 V.
Quantity of analog outputs:
• Base model: 1
• With expansion module: up to 4
• Base model: 1
• With expansion module: up to 4
• Base model: 1
• With expansion module: up to 4
• Base model: 1
• With expansion module: up to 4
• models 21-22, 31-33, 41-42: Not included
• models 23-24: 1
Types of analog output signals:
0-5 mА , 0(4)-20 mА, 0-10V
0-5 mА , 0(4)-20 mА, 0-10V
0-5 mА , 0(4)-20 mА, 0-10V
0-5 mА , 0(4)-20 mА, 0-10V
0-5 mА , 0(4)-20 mА, 0-10V
The limit of the main combined error of the output signal formation:
АО1: ±0,2 %
АО2-AO4: ±0,4 %
АО1: ±0,2 %
АО2-AO4: ±0,4 %
АО1: ±0,2 %
АО2-AO4: ±0,4 %
АО1: ±0,2 %
АО2-AO4: ±0,4 %
АО1: ±0,2 %
Galvanic isolation:
• Full. The input is isolated from other circuits.
• Galvanic isolation voltage is not less than 500 V.
• Full. The output is isolated from other circuits.
• Galvanic isolation voltage is not less than 500 V.
• Full. The output is isolated from other circuits.
• Galvanic isolation voltage is not less than 500 V.
• Full. The output is isolated from other circuits.
• Galvanic isolation voltage is not less than 500 V.
• Full. The output is isolated from other circuits.
• Galvanic isolation voltage is not less than 500 V.
Quantity of discrete inputs:
Base model: 3
With expansion module: up to 35
• Base model: 3
• With expansion module: up to 35
Base model: 3
With expansion module: up to 35
• Base model: 3
• With expansion module: up to 35
• models 22,24,33,42: 8
• models 21,23,32,41: 16
• models 31: 24
Trigger signal levels:
• Logical "0" signal - DISABLED state: 0-7 V
• Logical "1" signal - ON state: 18-30 V
• Logical "0" signal - DISABLED state: 0-7 V
• Logical "1" signal - ON state: 18-30 V
• Logical "0" signal - DISABLED state: 0-7 V
• Logical "1" signal - ON state: 18-30 V
• Logical "0" signal - DISABLED state: 0-7 V
• Logical "1" signal - ON state: 18-30 V
• Logical "0" signal - DISABLED state: 0-7 V
• Logical "1" signal - ON state: 18-30 V
Input consumption:
≤ 10 mA
≤ 10 mA
≤ 10 mA
≤ 10 mA
≤ 10 mA
Galvanic isolation:
• Full. The input is isolated from other circuits.
• Galvanic isolation voltage is not less than 500 V.
• Full. The input is isolated from other circuits.
• Galvanic isolation voltage is not less than 500 V.
• Full. The input is isolated from other circuits.
• Galvanic isolation voltage is not less than 500 V.
• Full. The input is isolated from other circuits.
• Galvanic isolation voltage is not less than 500 V.
• Full. The input is isolated from other circuits.
• Galvanic isolation voltage is not less than 500 V.
Quantity of discrete outputs:
Base model: 5
With expansion module: up to 37
• Base model: 5
• With expansion module: up to 37
Base model: 5
With expansion module: up to 37
• Base model: 5
• With expansion module: up to 37
• models 21,23,31,41: 8
• models 22,24,32,42: 16
• models 33: 24
Output types:
• Transistor OK: up to 40V, 100mA
• Solid state relay up to 60V, 1.0AAC/ADC
• Switching relay up to 220V, 8A
• Closing relay: up to 220V, 5A
• Opto-symistor: 600V, then 50mA
• Transistor OK: up to 40V, 100mA
• Solid state relay up to 60V, 1.0AAC/ADC
• Switching relay up to 220V, 8A
• Closing relay: up to 220V, 5A
• Opto-symistor: 600V, then 50mA
• Transistor OK: up to 40V, 100mA
• Solid state relay up to 60V, 1.0AAC/ADC
• Switching relay up to 220V, 8A
• Closing relay: up to 220V, 5A
• Opto-symistor: 600V, then 50mA
• Transistor OK: up to 40V, 100mA
• Solid state relay up to 60V, 1.0AAC/ADC
• Switching relay up to 220V, 8A
• Closing relay: up to 220V, 5A
• Opto-symistor: 600V, then 50mA
• Closing relay: up to 220V, 5A
Galvanic isolation:
• Full. The output is isolated from other circuits.
• Galvanic isolation voltage is not less than 500 V.
• Group. The output group is isolated from other circuits.
• Galvanic isolation voltage is not less than 500 V.
• Full. The output is isolated from other circuits.
• Galvanic isolation voltage is not less than 500 V.
• Full. The output is isolated from other circuits.
• Galvanic isolation voltage is not less than 500 V.
• Full. The input is isolated from other circuits.
• Galvanic isolation voltage is not less than 500 V.
Indication type:
Seven-segment, four-digit
Seven-segment, four-digit
Seven-segment, four-digit
Seven-segment, four-digit
Seven-segment, four-digit
Indication accuracy:
± 0,01 %
± 0,01 %
± 0,01 %
± 0,01 %
± 0,01 %
Interface type:
RS-485
RS-485
RS-485
RS-485
RS-485
Data exchange protocol:
Modbus-RTU (Slave mode)
Modbus-RTU (Slave mode)
Modbus-RTU (Slave mode)
Modbus-RTU (Slave mode)
Modbus-RTU (Slave mode)
Maximum line length within one network segment:
up to 1200 meters
up to 1200 meters
up to 1200 meters
up to 1200 meters
up to 1200 meters
Galvanic isolation:
• Full. The input is isolated from other circuits.
• Galvanic isolation voltage is not less than 500 V.
• Full. The input is isolated from other circuits.
• Galvanic isolation voltage is not less than 500 V.
• Full. The input is isolated from other circuits.
• Galvanic isolation voltage is not less than 500 V.
• Full. The input is isolated from other circuits.
• Galvanic isolation voltage is not less than 500 V.
• Full. The input is isolated from other circuits.
• Galvanic isolation voltage is not less than 500 V.
Installation type:
Shield
on DIN rail
Shield
on DIN rail
on DIN rail
Case size (HxWxD):
96х96х186 mm
110x160x58 mm
96х96х186 mm
110x160x58 mm
110x160x58 mm
Installation depth:
190 mm
-
190 mm
-
-
Weight, not more than:
1.0 kg
0.5 kg
1.0 kg
0.5 kg
0.5 kg
Degree of protection:
IP30
IP30
IP30
IP30
IP30
Supply voltage:
• Alternating current: ~ 230 (+22 V, -33 V) (50 ± 1) Hz
• Direct current: 24±4 V
• Alternating current: ~ 230 (+22 V, -33 V) (50 ± 1) Hz
• Direct current: 24±4 V
• Alternating current: ~ 230 (+22 V, -33 V) (50 ± 1) Hz
• Direct current: 24±4 V
• Alternating current: ~ 230 (+22 V, -33 V) (50 ± 1) Hz
• Direct current: 24±4 V
• Alternating current: ~ 230 (+22 V, -33 V) (50 ± 1) Hz
• Direct current: 24±4 V
Power consumption:
• Alternating current: 13 VA
• Direct current: no more than 350 mA
• Alternating current: 13 VA
• Direct current: no more than 350 mA
• Alternating current: 13 VA
• Direct current: no more than 350 mA
• Alternating current: 13 VA
• Direct current: no more than 350 mA
• Alternating current: 13 VA
• Direct current: no more than 350 mA
Ambient temperature:
-40 °C to +70 °C
-40 °C to +70 °C
-40 °C to +70 °C
-40 °C to +70 °C
-40 °C to +70 °C
Premises of use:
closed explosion-proof, fire-proof
closed explosion-proof, fire-proof
closed explosion-proof, fire-proof
closed explosion-proof, fire-proof
closed explosion-proof, fire-proof
Vibration:
with a frequency of up to 60 Hz with an amplitude of up to 0.1 mm
with a frequency of up to 60 Hz with an amplitude of up to 0.1 mm
with a frequency of up to 60 Hz with an amplitude of up to 0.1 mm
with a frequency of up to 60 Hz with an amplitude of up to 0.1 mm
with a frequency of up to 60 Hz with an amplitude of up to 0.1 mm
Atmospheric pressure:
from 84 to 106.7 kPa
from 84 to 106.7 kPa
from 84 to 106.7 kPa
from 84 to 106.7 kPa
from 84 to 106.7 kPa
