ІПМ-1N

All characteristics

Only differences

ІПМ-1

ІПМ-1N

General information:

Type of power supply:

Single-phase

Input signal type:

DC voltage
DC current

Input signals:Quantity inputs:
1
1
Ranges of possible input signals:
From 0 to 75 mV (from shunt) 
 From -100 до 100 mV 
 From 0 to 10 V 
 From 0 to 15 V 
 From 0 to 30 V 
 From 0 to 40 V 
 From 0 to 50 V 
 From 0 to 60 V 
 From 0 до 100 V 
 From 0 до 150 V 
 From 0 до 250 V 
 From 0 до 500 V 
 From 0 to 5 mA 
 From 0 to 20 mA 
 From 4 to 20 mA 
 From 0 to 1 A
From 0 to 75 mV (from shunt) 
 From 0 to 10 V 
 From 0 to 15 V 
 From 0 to 30 V 
 From 0 to 40 V 
 From 0 to 50 V 
 From 0 to 60 V 
 From 0 до 100 V 
 From 0 до 150 V 
 From 0 до 250 V 
 From 0 до 500 V 
 From 0 to 5 mA 
 From 0 to 20 mA 
 From 4 to 20 mA
Limit of the basic combined measurement error:
0,2 %
0,2 %
Measurement and conversion period:
0.1 seconds
0.1 seconds
Ultimate load:
Repeated twice, duration up to 5 seconds
Repeated twice, duration up to 5 seconds

Analog output signals:

Number of outputs:

1 (optional)

Output type:

Active output

Ranges of possible output signals:

0 to 5 mA / R ≤ 2000 Ω
0 to 20 mA / R ≤ 500 Ω
4 to 20 mA / R ≤ 500 Ω
0 to 10 V / R ≤ 2 кΩ

Discrete output signals:

Quantity of discrete outputs:

1 (optional)

Types of discrete outputs:

• NPN transistor: up to 40V, 100mA
• Switching relay: up to 230V, 8A

• NPN transistor: up to 40V, 100mA
• Closing relay: up to 230 V, 5 A

Interfaces:

Data exchange interface:

RS-485

Data exchange protocol:

Modbus RTU

Indication:

Digital display:

Seven-segment

Electrical data:

Supply voltage:

Alternating current: 230 V

Direct current: 24 V
Alternating current: 230 V

Power consumption:

Alternating current: ≤ 4.0 VА

Direct current: no more than 110 mА
Alternating current: ≤ 2.5 VА

Non-volatile memory:

Yes, EEPROM

Galvanic isolation:

• Full. All nodes are isolated from each other
• Galvanic (electrical) isolation voltage not less than 1500  V

Corps:

Installation type:

shield

for DIN rail mounting

Weight, not more than:

not more than 0.25 kg

not more than 0.15 kg

Case size (HxWxD):

48х96х106 mm

98х54х57 mm

Degree of protection:

IP30

IP20

Operating conditions:

Ambient temperature:

-40 °C to +70 °C

Sale Division

Department of Technical Support

Guarantee repair department

Touch operator panels Weintek

Meters-indicators

Controllers (PID, ON/OFF)

I/O modules

Spark protection barrier

Recorders and archivers

Meters and converters of electrical network parameters

Counters, timers, tachometers

Liquid level indicators and regulators

Programmed logical controllers

Manual signal transmitters

Technological signaling devices

Power supplies

Codesys PLC controllers

Normalizing converters

Galvanic isolation and branching blocks

Communication interface converters and amplifiers

Analytical instruments

Switching blocks

Control and protection units

GSM communication routers / modems

ІПМ-1N - DC Voltage and Current Indicator-Converter

AA

Input signal range:

01

02

03

04

05

06

07

08

09

10

11

12

13

14

BB

Analog output signal type:

00

01

02

03

04

CC

Discrete output signal type:

00

T

P

R

RS-485 interface presence:

00

01

U

Power Supply Voltage:

230

24

Input signal:

Analog output (optional):

Discrete output (optional):

Interfaces:

Assembling:

Power supply:

Seller

3 726 ₴

including VAT

General information:

Input signals:

Analog output signals:

Discrete output signals:

Interfaces:

Indication:

Electrical data:

Corps:

Operating conditions: