Touch operator panels Weintek
I/O modules
Spark protection barrier
Recorders and archivers
Meters and converters of electrical network parameters
Counters, timers, tachometers
Liquid level indicators and regulators
Programmed logical controllers
Manual signal transmitters
Technological signaling devices
Power supplies
Codesys PLC controllers
Galvanic isolation and branching blocks
Communication interface converters and amplifiers
Analytical instruments
Switching blocks
Control and protection units
GSM communication routers / modems
МТР-138
МТР-8
МТР-8
Regulation type:
ON/OFF
Three-position
Analog PID controller
Pulse PID controller
PWM PID controller
ON/OFF
Three-position
Analog PID controller
Pulse PID controller
PWM PID controller
ON/OFF
Three-position
Analog PID controller
Pulse PID controller
PWM PID controller
Number of independent regulators:
8
8
8
Additional features:
Signaller
Converter
Mathematical functions
Signaller
Converter
Mathematical functions
Expansion module support
Signaller
Converter
Mathematical functions
Expansion module support
Quantity of analog inputs:
8
group entry
8
group entry
8
group entry
Output type:
unified: passive
thermal resistance: three-wire connection
unified: passive
thermal resistance: three-wire connection
unified: passive
thermal resistance: three-wire connection
Types of input sensors and signals:
0-5 mA, 0-20 mA, 4-20 mA
0-75mВ, 0-1 V, 0-10 V
Cu 50, Cu 100, Pt 50P, Pt 100P, Pt50, Pt100, Pt1000
Type: K,L,J,S,B,T,A-1
0-1000 Ohm
0-5 mA, 0-20 mA, 4-20 mA
0-75mВ, 0-1 V, 0-10 V
Cu 50, Cu 100, Pt 50P, Pt 100P, Pt50, Pt100, Pt500, Pt1000
Type: K,L,J,S,B,T,A-1
0-5 mA, 0-20 mA, 4-20 mA
0-75mВ, 0-1 V, 0-10 V
Cu 50, Cu 100, Pt 50P, Pt 100P, Pt50, Pt100
Type: K,L,J,S,B,T,A-1
Limit of the basic combined measurement error:
≤ 0.2
≤ 0.2
≤ 0.2
Рolling cycle time:
up to 0.1
up to 0.1
up to 0.1
Galvanic isolation:
• Group. Inputs are isolated from other circuits.
• Galvanic isolation voltage is not less than 500 V.
• Group. Inputs are isolated from other circuits.
• Galvanic isolation voltage is not less than 500 V.
• Group. Inputs are isolated from other circuits.
• Galvanic isolation voltage is not less than 500 V.
Switching to another sensor type:
User-configurable, calibration required
Group input, one type for all inputs
User-configurable, calibration required
Group input, one type for all inputs
User-configurable, calibration required
Group input, one type for all inputs
Quantity of discrete inputs:
Not included
• Base model: Not included
• With expansion module: up to 16
• Base model: Not included
• With expansion module: up to 16
Trigger signal levels:
Not included
• Logical "0" signal - DISABLED state: 0-7 V
• Logical "1" signal - ON state 18-30 V
• Logical "0" signal - DISABLED state: 0-7 V
• Logical "1" signal - ON state 18-30 V
Input consumption:
Not included
≤ 10 mА
≤ 10 mА
Number of outputs:
up to 4 (option)
• Base model: 1
• With expansion module: up to 4
• Base model: 1
• With expansion module: up to 4
Output type:
active
active
active
Ranges of possible output signals:
0 to 5 mA / R ≤ 2000 Ω
0 to 20 mA / R ≤ 500 Ω
4 to 20 mA / R ≤ 500 Ω
0 to 10 V / R ≤ 2 кΩ
0 to 5 mA / R ≤ 2000 Ω
0 to 20 mA / R ≤ 500 Ω
4 to 20 mA / R ≤ 500 Ω
0 to 10 V / R ≤ 2 кΩ
0 to 5 mA / R ≤ 2000 Ω
0 to 20 mA / R ≤ 500 Ω
4 to 20 mA / R ≤ 500 Ω
0 to 10 V / R ≤ 2 кΩ
The limit of the main combined error of the output signal formation:
≤ 0.2 %
• Base model: ≤ 0.2 %
• With expansion module: ±0,4 %
• Base model: ≤ 0.2 %
• With expansion module: ±0,4 %
Quantity of discrete outputs:
8
• Base model: 8
• With expansion module: up to 24
• Base model: 8
• With expansion module: up to 24
Types of discrete outputs:
• NPN transistor: up to 40V, 100mA
• Closing relay: up to 230V, 5A
• NPN transistor: up to 40V, 100mA
• Switching relay: up to 230V, 8A
• Solid state relay: up to 60V, 1.0AAC/ADC
• Opto-triac: 600V, then 50mA
• NPN transistor: up to 40V, 100mA
• Switching relay: up to 230V, 8A
• Solid state relay: up to 60V, 1.0AAC/ADC
• Opto-triac: 600V, then 50mA
Data exchange interface:
RS-485
RS-485
RS-485
Data exchange protocol:
Modbus RTU
Modbus RTU
Modbus RTU
Indication type:
Seven-segment, digital
Seven-segment, digital
Seven-segment, digital
Indication accuracy:
Four categories
Four categories
Four categories
Supply voltage:
Alternating current: 230 V
Direct current: 24 V
Alternating current: 230 V
Direct current: 24 V
Alternating current: 230 V
Direct current: 24 V
Power consumption:
Alternating current: no more than 5.8 VA
Direct current: no more than 250 mA
Alternating current: no more than 8.5 VA
Direct current: no more than 250 mA
Alternating current: no more than 8.5 VA
Direct current: no more than 250 mA
Availability of a built-in power supply for inputs:
Not included
Not included
Not included
Non-volatile memory:
Yes, EEPROM
Yes, EEPROM
Yes, EEPROM
Galvanic isolation:
• All device components are isolated from each other. Group isolation of inputs.
• Galvanic (electrical) isolation voltage (for outputs and interface), not less than 500 V
• All device components are isolated from each other. Group isolation of inputs.
• Galvanic (electrical) isolation voltage (for outputs and interface), not less than 500 V
• All device components are isolated from each other. Group isolation of inputs.
• Galvanic (electrical) isolation voltage (for outputs and interface), not less than 500 V
Installation type:
Shield
Shield
DIN-rail
Case size (HxWxD):
96х96х135 mm
96х96х135 mm
110х160х58 mm
Weight, not more than:
no more than 1.0 kg
no more than 1.0 kg
no more than 0.5 kg
Degree of protection:
IP30
IP30
IP30
Ambient temperature:
-40 °C to +70 °C
-40 °C to +70 °C
-40 °C to +70 °C