Home I/O modules Discrete input modules:

- Discrete input module

RIO-mini DI8 - Discrete input module

Choose a modification:

Order code:

RIO-mini DI8
Ga
Internal power supply for input signals:
U
Supply voltage:

Number:

Available for order.

1️⃣ 🎯 Purpose:

The RIO-mini DI8 is designed for:

  • 📥 collecting data from 8 discrete inputs (dry contact, 24 V DC);
  • 📡 transmitting information over an RS-485 network using the Modbus RTU protocol;
  • 🛡 monitoring the presence/absence of supply voltage to actuators (e.g., protecting a three-phase motor from a phase break);
  • 🔢 counting the number of equipment activations or as a pulse counter;
  • 🔄 operating as part of industrial automation systems (ACS TP) with controllers, regulators, or SCADA systems.

2️⃣ 🔧 Functional features:

  • 8 independent discrete inputs with group galvanic isolation.
  • 8 independent pulse counters with options for:
    • scaling,
    • presetting the initial value,
    • operation at frequencies up to 20 kHz.
  • Slave mode in RS-485 network (exchange with PC/SCADA, PLC, or regulator).
  • Device configuration:
    • via USB (direct PC connection),
    • via RS-485 (using an adapter),
    • using the free MIK-Programmer software.
Inputs:
  • quantity: 16
  • PNP/NPN type
  • =24V
Interfaces:
  • USB
  • RS-485
  • Modbus RTU protocol.
Power supply:
  • = 24 V, 60mA
  • ~230V, 1.5VA
Seller

from

4 494

including VAT

Choose a modification and complete your order code

RIO-DI16

RIO-5N-DI16

RIO-mini DI8

Discrete input signals:

Quantity of discrete inputs:

16

16

8

Maximum pulse frequency:

5 Hz

5 Hz

20 kHz

Input current (input consumption), no more:

=24V, ≤10 mА

=12V, ≤10 mА
=24V, ≤10 mА
230V (AC), ≤10 mА

=24V, ≤10 mА

Trigger signal levels:

Logical "0" signal – "DISABLED" state: 0-7V
Сигнал логічної "1" – стан "УВІМКНЕНО": 18-30V

Logical "0" signal – "DISABLED" state: 0-3.5V (if 12V); 0-7V (if 24V); 0-20 (if 230V)
Сигнал логічної "1" – стан "УВІМКНЕНО": 9-15V (if 24V); 18-30V (if 24V); 30-242V (if 230V)

Logical "0" signal – "DISABLED" state: 0-7V
Сигнал логічної "1" – стан "УВІМКНЕНО": 18-30V

Connectable sensors:

• Switching devices (contacts of buttons, switches, reed switches, relays, etc.)
• n-p-n-type with open collector output
• p-n-p-type

• Switching devices (contacts of buttons, switches, reed switches, relays, etc.)
• n-p-n-type with open collector output
• p-n-p-type (except 230V input)

• Switching devices (contacts of buttons, switches, reed switches, relays, etc.)
• n-p-n-type with open collector output
• p-n-p-type (except 230V input)

Interfaces:

Data exchange interface:

RS-485

RS-485

RS-485
USB

Data exchange protocol:

Modbus RTU

Modbus RTU

Modbus RTU

Electrical data:

Supply voltage:

Direct current: 24 V

Direct current: 12 V
Direct current: 24 V
Alternating current: 230 V

Direct current: 24 V
Alternating current: 230 V

Power consumption:

Direct current: no more than 150 mA

Direct current: no more than: 240mA (for 12V), 150mA (for 24V)
Alternating current: no more than: 3.5 ВА

Direct current: no more than: 60mA
Alternating current: no more than: 1.5 ВА

Availability of a built-in power supply for inputs:

Yes (one per group of 8 inputs), 24V, ≤ 40 mA

Yes (one per group of 8 inputs), 12V or 24V, ≤ 40 mA

Yes, =24V, ≤ 40 mA

Galvanic isolation:

• The inputs are connected in 2 groups of 8 channels and are galvanically isolated from other inputs and other circuits.
• The interface is galvanically isolated from inputs and other circuits.
• Galvanic isolation voltage is not less than 500 V.

• The inputs are connected in 4 groups of 8 channels and are galvanically isolated from other inputs and other circuits.
• The interface is galvanically isolated from inputs and other circuits.
• Galvanic isolation voltage is not less than 500 V.

• The inputs are connected in groups and are galvanically isolated from other inputs and other circuits.
• The interface is galvanically isolated from inputs and other circuits.
• Galvanic isolation voltage is not less than 500 V.

Corps:

Installation type:

DIN rail

DIN rail

DIN rail

Case size (HxWxD):

117х23х129 mm

132х128х57 mm

100х55х60 mm

Weight, not more than:

0,18 kg

0,18 kg

0,35 kg

Degree of protection:

IP20

IP20

IP20

Operating conditions:

Ambient temperature:

-40 °C to +70 °C

-40 °C to +70 °C

-40 °C to +70 °C