The BRU-1 device is intended for manual control of an analog actuator or a setter of a unified analog signal. It provides the formation of a unified signal: 0..5 mA, 0(4)…20 mA or 0…10 V, the value of which is set by the user from the front panel.

Functionality:

• Output signal: 0..5 mA, 0(4)…20 mA or 0…10 V (modifications);
• Power supply =24 V;
• Mounting in a panel;
• Galvanic isolation.

The BRU-420 device is designed for manual control of an analog actuator or a setter of a unified analog signal. It provides the formation of a unified signal: 4…20 mA, the value of which is set by the user from the front panel.

Functionality:

• Output signal: 4…20 mA;
• Power supply =24 V or current loop;
• Mounting in a panel;
• Galvanic isolation.

The BRU-17 device is designed for manual or automatic control of an analog actuator or a setter of a unified analog signal. In automatic mode, the BRU-17 transmits a signal from the control device or controller to the actuator, and in manual mode, it generates a unified signal: 0..5 mA, 0(4)…20 mA or 0…10 V, the value of which is set by the user from the front panel.

The BRU-107 device is designed for manual or automatic control of an analog actuator or a setter of a unified analog signal. In automatic mode, the BRU-107 transmits a signal from the control device or controller to the actuator, and in manual mode, it generates a unified signal: 0..5 mA, 0(4)…20 mA or 0…10 V, the value of which is set by the user from the front panel.

The BRU-15 device is designed for manual or automatic control of a pulse actuator (MEO) or a setter of discrete (pulse) signals "more" or "less". In automatic mode, BRU-15 transmits a signal from a control device or controller to the actuator, and in manual mode - generates discrete (pulse) signals "more" or "less", the control is carried out by the user from the front panel.

The BRU-105 device is designed for manual or automatic control of a pulse actuator (MEO) or a setter of discrete (pulse) signals "more" or "less". In automatic mode, BRU-105 transmits a signal from a control device or controller to the actuator, and in manual mode - generates discrete (pulse) signals "more" or "less", the control is carried out by the user from the front panel.

The BRU-110 device is intended for manual or automatic control of various types of actuators (analog or pulse) or a pulse type signal generator ("more" or "less") and analog type (0..5 mA, 0(4)…20 mA or 0…10 V). In automatic mode, the BRU-110 transmits a signal from a control device or controller to the actuator, and in manual mode, depending on the type of actuator, it generates discrete (pulse) signals "more" or "less" or unified signals (0..5 mA, 0(4)…20 mA or 0…10 V), the control is performed by the user from the front panel.

The BRU-110Н device is intended for manual or automatic control of various types of actuators (analog or pulse) or a pulse type signal generator ("more" or "less") and analog type (0..5 mA, 0(4)…20 mA or 0…10 V). In automatic mode, the BRU-110Н transmits a signal from a control device or controller to the actuator, and in manual mode, depending on the type of actuator, it generates discrete (pulse) signals "more" or "less" or unified signals (0..5 mA, 0(4)…20 mA or 0…10 V), the control is performed by the user from the front panel.

The BRU-10 device is intended for manual or automatic control of various types of actuators (analog or pulse) or a pulse type signal generator ("more" or "less") and analog type (0..5 mA, 0(4)…20 mA or 0…10 V). In automatic mode, the BRU-10 transmits a signal from a control device or controller to the actuator, and in manual mode, depending on the type of actuator, it generates discrete (pulse) signals "more" or "less" or unified signals (0..5 mA, 0(4)…20 mA or 0…10 V), the control is performed by the user from the front panel.

Signals are connected to the BRU-10 device via the KBZ-24-14 terminal block connector.

Signal switching unit BKS-4, designed to increase the number of groups of switching contacts of manual control units: BRU-10, BRU-7, BRU-7K1, BRU-5, BRU-5K1.

Features:

• Input signal - from one switching group;
• Output signals - 4 groups of switching contacts of relays with magnetic locking;
• Parallel connection of BKS-4 units is allowed;
• Command status indicators manual-automatic, power indicator.

The PU-57 programming console is designed for configuring and adjusting the manual control units BRU-7 (BRU-7K1), BRU-5 (BRU-5K1), BRU-107 (BRU-17) and BRU-105 (BRU-15). It is connected directly to the unit and allows you to unlock access to the internal menu for configuring, adjusting and calibrating the manual control units.