ІТМ-111 Indicator - measuring device for technological parameters

All characteristics

Only differences

ІТМ-110

ІТМ-111

ІТМ-111В

General information:

Device type:

Technological indicator

Additional features:

Input signal conversion
Alarms

Analog input signals:Quantity of analog inputs:
1
1
1
Types of input sensors and signals:
0-5 mA, 0-20 mA, 4-20 mA 
 0-75 mВ , 0-200 mВ , 0-2 V, 0-10 V 
 Cu 50, Cu 100, Pt 50P, Pt 100P, Pt50, Pt100, Pt500, Pt1000 
 Type: K,L,J,S,B,E,A-1 
 0-1 kΩ, NTC (0-1 kΩ, 0-3 kΩ, 0-5 kΩ, 0-10 kΩ)
0-5 mA, 0-20 mA, 4-20 mA 
 0-75 mВ , 0-200 mВ , 0-2 V, 0-10 V 
 Cu 50, Cu 100, Pt 50P, Pt 100P, Pt50, Pt100, Pt500, Pt1000 
 Type: K,L,J,S,B,E,A-1 
 0-1 kΩ, NTC (0-1 kΩ, 0-3 kΩ, 0-5 kΩ, 0-10 kΩ)
0-5 mA, 0-20 mA, 4-20 mA 
 0-75 mВ , 0-200 mВ , 0-2 V, 0-10 V 
 Cu 50, Cu 100, Pt 50P, Pt 100P, Pt50, Pt100, Pt500, Pt1000 
 Type: K,L,J,S,B,E,A-1 
 0-1 kΩ, NTC (0-1 kΩ, 0-3 kΩ, 0-5 kΩ, 0-10 kΩ)
Limit of the basic combined measurement error:
≤ 0.2 %
≤ 0.2 %
≤ 0.2 %
Рolling cycle time:
up to 0.1  seconds
up to 0.1  seconds
up to 0.1  seconds
Galvanic isolation:
• Input isolated from other circuits. 
• Galvanic isolation voltage is not less than 500 V.
• Input isolated from other circuits. 
• Galvanic isolation voltage is not less than 500 V.
• Input isolated from other circuits. 
• Galvanic isolation voltage is not less than 500 V.
Switching to another sensor type:
User-configurable, calibration required
User-configurable, calibration required
User-configurable, calibration required

Discrete input signals:

Quantity of discrete inputs:

Not included

Analog output signals:

Number of outputs:

Output type:

active

Ranges of possible output signals:

0 to 5 mA / R ≤ 2000 Ω
0 to 20 mA / R ≤ 500 Ω
4 to 20 mA / R ≤ 500 Ω
0 to 10 V / R ≤ 2 кΩ

The limit of the main combined error of the output signal formation:

≤ 0.2 %

Discrete output signals:

Quantity of discrete outputs:

Types of discrete outputs:

• NPN transistor: up to 40V, 100mA
• Switching relay: up to 230V, 8A
• Solid State Relay (SSR): up to 60 V, 1 A

Interfaces:

Data exchange interface:

RS-485

Data exchange protocol:

Modbus RTU
Slave, master

Indication:

Indication type:

Seven-segment, digital

Seven-segment, digital
Linear indicator, bar graph

Indication accuracy:

Four categories

Electrical data:Supply voltage:
Alternating current: 230 V 
 Direct current:  24 V
Alternating current: 230 V 
 Direct current:  24 V
Alternating current: 230 V 
 Direct current:  24 V
Power consumption:
Alternating current: ≤ 6.5 VА 
Direct current: no more than 180 mA
Alternating current: ≤ 6.5 VА 
Direct current: no more than 180 mA
Alternating current: ≤ 6.5 VА 
Direct current: no more than 180 mA
Availability of a built-in power supply for inputs:
ption, provided that a 4..20mA signal is ordered 
 = 24 V, 25 mА
ption, provided that a 4..20mA signal is ordered 
 = 24 V, 25 mА
ption, provided that a 4..20mA signal is ordered 
 = 24 V, 25 mА
Non-volatile memory:
Yes, EEPROM
Yes, EEPROM
Yes, EEPROM
Galvanic isolation:
• Full. All components of the device are isolated from each other. 
• Galvanic (electrical) isolation voltage (for outputs and interface), not less than 1500 V
• Full. All components of the device are isolated from each other. 
• Galvanic (electrical) isolation voltage (for outputs and interface), not less than 1500 V
• Full. All components of the device are isolated from each other. 
• Galvanic (electrical) isolation voltage (for outputs and interface), not less than 1500 V

Corps:

Installation type:

Shield

Case size (HxWxD):

48х96х141 mm

96х48х141 mm

Weight, not more than:

не більше 0,35 kg

Degree of protection:

IP30

Operating conditions:

Ambient temperature:

-40 °C to +70 °C

Sale Division

Department of Technical Support

Guarantee repair department

Touch operator panels Weintek

Meters-indicators

Controllers (PID, ON/OFF)

I/O modules

Spark protection barrier

Recorders and archivers

Meters and converters of electrical network parameters

Counters, timers, tachometers

Liquid level indicators and regulators

Programmed logical controllers

Manual signal transmitters

Technological signaling devices

Power supplies

Codesys PLC controllers

Normalizing converters

Galvanic isolation and branching blocks

Communication interface converters and amplifiers

Analytical instruments

Switching blocks

Control and protection units

GSM communication routers / modems

ІТМ-111 Indicator - measuring device for technological parameters

ІТМ-111

AA

Input signal type:

01

02

03

04

05

06

07

08

09

10

11

12

13

14

15

16

17

18

19

20

CC

Analog Output Signal Code:

00

01

02

03

04

DD

Discrete Output Signal Code:

T

P

K

U

Power Supply Voltage:

230

24

Input signals:

Analog output:

Discrete outputs:

Interfaces:

Power supply:

Assembling:

Seller

9 864 ₴

including VAT

General information:

Analog input signals:

Discrete input signals:

Analog output signals:

Discrete output signals:

Interfaces:

Indication: