БПТ-31 Indicator - measuring device for technological parameters with bar graph

БПТ-31

General information:

Device type:

Weighing Indicator

Additional features:

Input signal conversion
Alarms

Analog input signals:Quantity of analog inputs:
1 
 Six-wire connection:
Types of input sensors and signals:
0-20 mV , 0-40 mV  
 -20 - +20 mV , -40 - +40 mV
Limit of the basic combined measurement error:
≤ 0.1 %
Рolling cycle time:
0.1 - 0.5 seconds
Galvanic isolation:
• Input isolated from other circuits. 
• Galvanic isolation voltage is not less than 500 V.

Discrete input signals:

Quantity of discrete inputs:

Trigger signal levels:

Logical "0" signal – "DISABLED" state: from 0 to 7 V, negative polarity
Сигнал логічної "1" – стан "УВІМКНЕНО": from 18 to 30 V, negative polarity

Input consumption:

≤ 10 mA

Analog output signals:

Number of outputs:

1 (option)

Output type:

active

Ranges of possible output signals:

0 to 5 mA / R ≤ 2000 Ω
0 to 20 mA / R ≤ 500 Ω
4 to 20 mA / R ≤ 500 Ω
0 to 10 V / R ≤ 2 кΩ

The limit of the main combined error of the output signal formation:

≤ 0.2 %

Discrete output signals:

Quantity of discrete outputs:

Types of discrete outputs:

• NPN transistor: up to 40V, 100mA
• Relay: up to 230V, 5A

Interfaces:

Data exchange interface:

RS-485
USB

Data exchange protocol:

Modbus RTU

Indication:

Indication type:

Seven-segment, digital

Indication accuracy:

Six digits

Electrical data:Supply voltage:
Alternating current: 230 V
Power consumption:
Alternating current: ≤ 4.0 VА
Availability of a built-in power supply for inputs:
Yes, one channel 
 5 V or 10 V
Non-volatile memory:
Yes, EEPROM
Galvanic isolation:
• Full. All components of the device are isolated from each other. 
• Galvanic (electrical) isolation voltage (for outputs and interface), not less than 1500 V

Corps:

Installation type:

Shield

Case size (HxWxD):

96х96х60 mm

Weight, not more than:

не більше 0.3 kg

Degree of protection:

IP30

Operating conditions:

Ambient temperature:

-40 °C to +70 °C

Sale Division

Department of Technical Support

Guarantee repair department

Touch operator panels Weintek

Meters-indicators

Controllers (PID, ON/OFF)

I/O modules

Spark protection barrier

Recorders and archivers

Meters and converters of electrical network parameters

Counters, timers, tachometers

Liquid level indicators and regulators

Programmed logical controllers

Manual signal transmitters

Technological signaling devices

Power supplies

Codesys PLC controllers

Normalizing converters

Galvanic isolation and branching blocks

Communication interface converters and amplifiers

Analytical instruments

Switching blocks

Control and protection units

GSM communication routers / modems

БПТ-31 Indicator - measuring device for technological parameters with bar graph

БПТ-31

N

Input signal range:

00

01

02

03

04

K

Strain gauge supply voltage:

01

02

Т

Analog output range:

00

01

02

03

04

D

Type of discrete outputs:

0

4T

4P

L

Availability of discrete inputs:

00

01

R

RS-485 Interface:

00

01

⚖️ Scaling and Taring:

🔄 Output Signal Generation:

📟 Display:

🔗 System Integration:

Входи:

Analog output:

Discrete outputs:

Interfaces:

Assembling:

Power supply:

Seller

6 678 ₴

including VAT

General information:

Analog input signals:

Discrete input signals:

Analog output signals:

Discrete output signals:

Interfaces:

Indication:

Electrical data:

Corps:

Operating conditions: