Touch operator panels Weintek
I/O modules
Spark protection barrier
Recorders and archivers
Meters and converters of electrical network parameters
Counters, timers, tachometers
Liquid level indicators and regulators
Programmed logical controllers
Manual signal transmitters
Technological signaling devices
Power supplies
Codesys PLC controllers
Galvanic isolation and branching blocks
Communication interface converters and amplifiers
Analytical instruments
Switching blocks
Control and protection units
GSM communication routers / modems
- AC voltage and current converter
ПНС-2
ПНС-102
ПНС-652
ПНС-420
Type of power supply:
Single-phase
Single-phase
Single-phase
Single-phase
Input signal type:
AC voltage
AC voltage
AC voltage
AC current
AC voltage
Quantity inputs:
1
1
1
1
Ranges of possible input signals:
From 0 to 75 mV (from shunt) / R = 250 kΩ
From 0 to 10 V / R = 130 kΩ
From 0 to 15 V / R = 200 kΩ
From 0 to 60 V / R = 267 kΩ
From 0 to 100 V / R = 200 kΩ
From 0 to 150 V / R = 667 kΩ
From 0 to 250 V / R = 667 kΩ
From 0 to 500 V / R = 1.3 MΩ
From 0 to 750 V / R = 2.5 Ω
From 0 to 75 mV (from shunt) / R = 250 kΩ
From 0 to 10 V / R = 130 kΩ
From 0 to 15 V / R = 200 kΩ
From 0 to 60 V / R = 267 kΩ
From 0 to 100 V / R = 200 kΩ
From 0 to 150 V / R = 667 kΩ
From 0 to 250 V / R = 667 kΩ
From 0 to 500 V / R = 1.3 MΩ
From 0 to 750 V / R = 2.5 Ω
From 0 to 100 mA / R = 1 Ω
From 0 to 1 A / R = 0.1 Ω
From 0 to 2.5 A / R = 0.1 Ω
From 0 to 5 A / R = 0.022 Ω
From 0 to 75 mV (from shunt) / R = 250 kΩ
From 0 to 10 V / R = 1 MΩ
From 0 to 15 V / R = 3 MΩ
From 0 to 60 V / R = 600 кΩ
From 0 to 100 V / R = 850 кΩ
From 0 to 150 V / R = 1.4 MΩ
From 0 to 250 V / R = 2.3 MΩ
From 0 to 500 V / R = 5 МΩ
From 0 to 10 V / R = 50 kΩ
From 0 to 15 V / R = 150 kΩ
From 0 to 60 V / R = 300 kΩ
From 0 to 100 V / R = 500 kΩ
From 0 to 150 V / R = 750 kΩ
From 0 to 250 V / R = 1.2 МΩ
From 0 to 500 V / R = 2.5 МΩ
Limit of the basic combined measurement error:
0,4 %
0,4 %
0,4 %
0,4 %
Measurement and conversion period:
adjustable time: 0.5–6 seconds
no more 6 seconds
no more 6 seconds
Configurable: max 0.6 seconds
Ultimate load:
Repeated twice, duration up to 5 seconds
Repeated twice, duration up to 5 seconds
• an overvoltage of 5 times the nominal value for up to 5 seconds, for voltage levels up to 100 V.
• an overvoltage of 2 times the nominal value for up to 5 seconds, for voltage levels above 100 V.
• an overcurrent of 5 times the nominal value for up to 5 seconds, for current signals.
• an overvoltage of 5 times the nominal value for up to 5 seconds, for voltage levels up to 100 V.
• an overvoltage of 2 times the nominal value for up to 5 seconds, for voltage levels above 100 V.
Maximum input signal frequency:
1 kHz
Maximum: 1 kHz
-
-
Number of outputs:
1
1
1
1
Output type:
Active output
Active output
Active output
passive output
Ranges of possible output signals:
0 to 5 mA / R ≤ 2000 Ω
–5 to 5 mA / R ≤ 2000 Ω
0 to 20 mA / R ≤ 500 Ω
0 to 20 mA / R ≤ 500 Ω
4 to 20 mA / R ≤ 500 Ω
0 to 10 V / R ≤ 2 кΩ
–10 to 10 V / R ≤ 2 кΩ
0 to 5 mA / R ≤ 2000 Ω
–5 to 5 mA / R ≤ 2000 Ω
0 to 20 mA / R ≤ 500 Ω
0 to 20 mA / R ≤ 500 Ω
4 to 20 mA / R ≤ 500 Ω
0 to 10 V / R ≤ 2 кΩ
–10 to 10 V / R ≤ 2 кΩ
0 to 5 mA / R ≤ 2000 Ω
0 to 20 mA / R ≤ 500 Ω
4 to 20 mA / R ≤ 500 Ω
0 to 10 V / R ≤ 2 кΩ
4 to 20 mA / R ≤ 500 Ω
Digital display:
Not included
Not included
Not included
Not included
Supply voltage:
Direct current: 24 V
Alternating current: 230 V
Direct current: 24 V
Alternating current: 230 V
Direct current: 24 V
Direct current: 24 V (current loop)
Power consumption:
Direct current: no more than 120 mА
Alternating current: ≤ 5.0 VА
Direct current: no more than 100 mА
Alternating current: ≤ 5.0 VА
Direct current: no more than 30 mА
Direct current: no more than 30 mА
Galvanic isolation:
• Complete. All nodes are isolated from each other
• Galvanic (electrical) isolation voltage not less than 2000 V
• Complete. All nodes are isolated from each other
• Galvanic (electrical) isolation voltage not less than 2000 V
• Complete. All nodes are isolated from each other
• Galvanic (electrical) isolation voltage not less than 2000 V
-
Installation type:
for DIN rail mounting
for DIN rail mounting
for DIN rail mounting
for DIN rail mounting
Weight, not more than:
not more than 0.5 kg
not more than 0.2 kg
not more than 0.1 kg
not more than 0.1 kg
Case size (HxWxD):
95х100х110 mm
100х23х115 mm
94х7х64 mm
76х26х115 mm
Degree of protection:
IP30
IP30
IP20
IP20
Ambient temperature:
-40 °C to +70 °C
-40 °C to +70 °C
-40 °C to +70 °C
-40 °C to +70 °C