Home Meters-indicators Wood moisture meters:

Wood Moisture Indicator-Meter

ІВМ-16Н Wood Moisture Indicator-Meter

Order code:

ІВМ-16Н
AA
default tree species:
BB
temperature input sensor type:
CC
measurement range of unified inputs:
U
power Supply Voltage:

Number:

Available for order.

IVM-16N is a professional electronic device designed for accurate moisture measurement of wood using the contact method. Equipped with an external sensor (electrodes), it allows for rapid, non-destructive moisture control in various wood types to a depth of 10–20 mm.

It is used in woodworking, furniture production, construction, drying chambers, quality control laboratories, and lumber warehouses.

🛠️ Key Features:

  • Wood moisture measurement:
    • Wide measurement range: 6% – 85%
    • Method: contact-type resistive (via needle electrodes)
  • Digital display of results:
    • 4-digit LED display with backlight
    • Shows moisture in percentage (% RH) and temperature in °C
  • Support for various wood species:
    • Selectable wood type considering specific electrical conductivity
    • Built-in calibration curves for softwoods, hardwoods, and exotic species
  • Temperature compensation:
    • Automatic or manual correction of readings depending on wood temperature
  • Parameter memory:
    • Non-volatile memory stores settings such as wood type and unit preferences
  • RS-485 / Modbus RTU interface:
    • For transmitting measurement results to SCADA/PLC/data loggers
    • Supports Modbus RTU protocol (Slave mode)
    • Allows remote polling in industrial systems
Measurement Inputs:
  • 8 wood moisture channels
  • 6 temperature channels
  • 2 analog input channels (0–20 mA / 4–20 mA)
Discrete outputs:
  • quantity: 1
  • relay: up to 230V, 8A.
Interfaces:
  • RS-485
  • Modbus RTU protocol
Assembling:
  • DIN rail
  • 160х110х58 mm
Power supply:
  • ~ 100 V to ~ 242 V, 4.2 VA
  • = 18 V to 36 V, 200 mА
Seller

from

6 678

including VAT

Choose a modification and complete your order code

ІВМ-16Н

General information:

Device type:

Wood Moisture Indicator

Additional features:

Alarms

Analog input signals:

Quantity of analog inputs:

Total 16

Types of input sensors and signals:

2 channels: 0-20 mA, 4-20 mA
6 channels: Cu 50, Cu 100, Pt 50P, Pt 100P, Pt50, Pt100, group 21, group 23
8 channels: Wood moisture (Pine, Spruce, Birch, Beech, Oak, Hornbeam, Ash, Poplar, Larch)

Limit of the basic combined measurement error:

≤ 0.2 %

Рolling cycle time:

up to 0.1 seconds

Galvanic isolation:

• Input isolated from other circuits.
• Galvanic isolation voltage is not less than 500 V.

Switching to another sensor type:

User-configurable, calibration required
Switching to a different wood type does not require recalibration

Discrete input signals:

Quantity of discrete inputs:

Not included

Analog output signals:

Number of outputs:

Not included

Discrete output signals:

Quantity of discrete outputs:

2

Types of discrete outputs:

• Closing relay: up to 230V, 8A

Interfaces:

Data exchange interface:

RS-485

Data exchange protocol:

Modbus RTU
Slave

Indication:

Indication type:

Seven-segment, digital

Indication accuracy:

Four categories

Electrical data:

Supply voltage:

Alternating current: 230 V
Direct current: 24 V

Power consumption:

Alternating current: ≤ 4.4 VА
Direct current: no more than 300 mA

Availability of a built-in power supply for inputs:

Yes, humidity channels power

Non-volatile memory:

Yes, EEPROM

Galvanic isolation:

• Full. All components of the device are isolated from each other.
• Galvanic (electrical) isolation voltage (for outputs and interface), not less than 1500 V

Corps:

Installation type:

DIN-rail

Case size (HxWxD):

110х160х58 mm

Weight, not more than:

не більше 0,35 kg

Degree of protection:

IP30

Operating conditions:

Ambient temperature:

-40 °C to +70 °C