Touch operator panels Weintek
I/O modules
Spark protection barrier
Recorders and archivers
Meters and converters of electrical network parameters
Counters, timers, tachometers
Liquid level indicators and regulators
Programmed logical controllers
Manual signal transmitters
Technological signaling devices
Power supplies
Codesys PLC controllers
Galvanic isolation and branching blocks
Communication interface converters and amplifiers
Analytical instruments
Switching blocks
Control and protection units
GSM communication routers / modems
АК-1
Regulation type:
ON/OFF
Number of independent regulators:
1
Additional features:
Signaller
Quantity of analog inputs:
1
Output type:
passive
Types of input sensors and signals:
0-5 mA, 0-20 mA, 4-20 mA
0-10 V (DC), 0-260 V(AC)
Limit of the basic combined measurement error:
≤ 0.2 (transformation)
≤ 10/5 % (when installed from the front panel)
Galvanic isolation:
• Input isolated from other circuits.
Switching to another sensor type:
User-selectable sensor type switching. No calibration required.
Quantity of discrete outputs:
up to 2
Types of discrete outputs:
• Switching relay: up to 230V, 8A (up to 2)
Supply voltage:
Direct current: 24 V
Power consumption:
Direct current: no more than 90 mA
Availability of a built-in power supply for inputs:
Not included
Galvanic isolation:
• Full. All components of the device are isolated from each other.
• Galvanic (electrical) isolation voltage (for outputs and interface), not less than 500 V
Installation type:
On DIN rail
Case size (HxWxD):
76х26х115 mm
Weight, not more than:
no more than 0.13 kg
Degree of protection:
IP30
Ambient temperature:
-40 °C to +70 °C