Touch operator panels Weintek
I/O modules
Spark protection barrier
Recorders and archivers
Meters and converters of electrical network parameters
Counters, timers, tachometers
Liquid level indicators and regulators
Programmed logical controllers
Manual signal transmitters
Technological signaling devices
Power supplies
Codesys PLC controllers
Galvanic isolation and branching blocks
Communication interface converters and amplifiers
Analytical instruments
Switching blocks
Control and protection units
GSM communication routers / modems
- Actuator position transducer, inductive, inductive
PPM-2
Quantity inputs:
1
Input type:
Inductive sensor type
Three-wire connection
Ranges of possible input signals:
The full stroke of the input signal corresponds to the angle of rotation of the profile cam 0-225°(0-90°) of the mechanism sensor shaft
Limit of the basic combined measurement error:
± 2,5 %
Measurement and conversion period:
0,01 second
Number of outputs:
1
Output type:
active
Ranges of possible output signals:
0 to 5 mA / R = 2000 Ohm
0 to 20 mA / R ≤ 500 Ohm
4 to 20 mA / R ≤ 500 Ohm
0 to 10 V / R ≥ 2000 Ohm
Availability of discrete outputs:
No
Quantity of discrete outputs:
not included
Types of discrete outputs:
not included
Data exchange interface:
not included
Data exchange protocol:
not included
Digital display:
No
Supply voltage:
Direct current: 24 V
Alternating current: 230 V
Power consumption:
Direct current: no more than 120 mA
Alternating current: no more than 5 VA
Non-volatile memory:
not included
Galvanic isolation:
• Full. All components of the device are isolated from each other.
• Galvanic isolation voltage is not less than 500 V.
Installation type:
on DIN rail
Case size (HxWxD):
96х55х110 mm
Weight, not more than:
0,4 kg
Degree of protection:
IP30
Ambient temperature:
-40 °C to +70 °C