Touch operator panels Weintek
I/O modules
Spark protection barrier
Recorders and archivers
Meters and converters of electrical network parameters
Counters, timers, tachometers
Liquid level indicators and regulators
Programmed logical controllers
Manual signal transmitters
Technological signaling devices
Power supplies
Codesys PLC controllers
Galvanic isolation and branching blocks
Communication interface converters and amplifiers
Analytical instruments
Switching blocks
Control and protection units
GSM communication routers / modems
БРУ-110
БРУ-110Н
БРУ-10
Quantity of analog inputs:
2
2
2
Possible input signal ranges/load resistance:
0 to 5 mA / R = 400 Ohm
0 to 20 mA / R ≤ 100 Ohm
4 to 20 mA / R ≤ 100 Ohm
0 to 10 V / R ≥ 25kOhm
0 to 5 mA / R = 400 Ohm
0 to 20 mA / R ≤ 100 Ohm
4 to 20 mA / R ≤ 100 Ohm
0 to 10 V / R ≥ 25kOhm
0 to 5 mA / R = 400 Ohm
0 to 20 mA / R ≤ 100 Ohm
4 to 20 mA / R ≤ 100 Ohm
0 to 10 V / R ≥ 25kOhm
Limit of the basic combined measurement error:
≤ 0.2 %
≤ 0.2 %
≤ 0.2 %
Measurement and conversion period:
0.1 seconds
0.1 seconds
0.1 seconds
Quantity of analog outputs:
1
1
1
Ranges of possible output signals/load resistance:
0 to 5 mA / R = 2000 Ohm
0 to 20 mA / R ≤ 500 Ohm
4 to 20 mA / R ≤ 500 Ohm
0 to 10 V / R ≥ 2000 Ohm
0 to 5 mA / R = 2000 Ohm
0 to 20 mA / R ≤ 500 Ohm
4 to 20 mA / R ≤ 500 Ohm
0 to 10 V / R ≥ 2000 Ohm
0 to 5 mA / R = 2000 Ohm
0 to 20 mA / R ≤ 500 Ohm
4 to 20 mA / R ≤ 500 Ohm
0 to 10 V / R ≥ 2000 Ohm
The limit of the main combined error of the output signal formation:
±0,2%
±0,2%
±0,2%
External MANUAL/AUTO switching
Yes
"More" and "Less" signals from the controller
Yes
"More" and "Less" signals from the controller
Yes
"More" and "Less" signals from the controller
Input type:
=24 V, NPN
=24 V, NPN
=24 V, NPN
Quantity of outputs:
4
4
4
Output types:
Transfer relays
Transfer relays
Transfer relays
Load type:
Direct current: 6..34 V, 250 mА
Alternating current: 12..242 V, 250 mA
Direct current: 6..34 V, 250 mА
Alternating current: 12..242 V, 250 mA
Direct current: 6..34 V, 250 mА
Alternating current: 12..242 V, 250 mA
Indication type:
Seven-segment, four digits
Bar graph
Seven-segment, four digits
Bar graph
Seven-segment, four digits
Bar graph
Indication accuracy:
± 0,01 %
± 0,01 %
± 0,01 %
Interface type:
RS-485
RS-485
RS-485
Data exchange protocol:
Modbus RTU
Modbus RTU
Modbus RTU
Installation type:
Shield
DIN rail
Shield
Case size (HxWxD):
96х96х120 mm
110х160х58 mm
96х96х120 mm
Degree of protection:
IP30
IP30
IP30
Supply voltage:
Direct current: 24 V
Alternating current: ~230 V
Direct current: 24 V
Alternating current: ~230 V
Direct current: 24 V
Alternating current: ~230 V
Power consumption:
Direct current: no more than 180 mА
Alternating current: ≤ 8.0 VА
Direct current: no more than 200 mА
Alternating current: ≤ 8.5 VА
Direct current: no more than 180 mА
Alternating current: ≤ 8.0 VА
Galvanic isolation:
• Complete. All nodes are isolated from each other.
• Galvanic isolation voltage is not less than 500 V.
• Complete. All nodes are isolated from each other.
• Galvanic isolation voltage is not less than 500 V.
• Complete. All nodes are isolated from each other.
• Galvanic isolation voltage is not less than 500 V.
Ambient temperature:
-40 °C to +70 °C
-40 °C to +70 °C
-40 °C to +70 °C