Touch operator panels Weintek
I/O modules
Spark protection barrier
Recorders and archivers
Meters and converters of electrical network parameters
Counters, timers, tachometers
Liquid level indicators and regulators
Programmed logical controllers
Manual signal transmitters
Technological signaling devices
Power supplies
Codesys PLC controllers
Galvanic isolation and branching blocks
Communication interface converters and amplifiers
Analytical instruments
Switching blocks
Control and protection units
GSM communication routers / modems
- Programmable logic controller
МІК-50-16
МІК-50-17
МІК-50-26
МІК-50-27
Expansion module:
Not supported
Not supported
Not supported
Not supported
Quantity of analog inputs:
4
4
8
8
Types of input sensors and signals:
0-5mА, 0(4)-20mА, 0-10V
0-50mВ, 0-200mВ, 0-1V
Pt(50P, 100P, gr21, Pt50, Pt100, Pt500, Pt1000), Cu(50, 100, гр.23)
Type L, Type K, Type S, Type B, Type A, Type J, Type E
0-5mА, 0(4)-20mА, 0-10V
0-50mВ, 0-200mВ, 0-1V
Pt(50P, 100P, gr21, Pt50, Pt100, Pt500, Pt1000), Cu(50, 100, гр.23)
Type L, Type K, Type S, Type B, Type A, Type J, Type E
0-5mА, 0(4)-20mА, 0-10V
0-5mА, 0(4)-20mА, 0-10V
Limit of the basic combined measurement error:
± 0,2 %
± 0,2 %
± 0,2 %
± 0,2 %
Рolling cycle time:
0.1 second
0.1 second
0.1 second
0.1 second
Galvanic isolation:
• Full. The input is isolated from other circuits.
• Galvanic isolation voltage is not less than 500 V.
• Full. The input is isolated from other circuits.
• Galvanic isolation voltage is not less than 500 V.
• Group. The output group is isolated from other circuits.
• Galvanic isolation voltage is not less than 500 V.
• Group. The output group is isolated from other circuits.
• Galvanic isolation voltage is not less than 500 V.
Quantity of analog outputs:
2
1
1
not included
Types of analog output signals:
0-5 mА , 0(4)-20 mА, 0-10V
0-5 mА , 0(4)-20 mА, 0-10V
0-5 mА , 0(4)-20 mА, 0-10V
not included
The limit of the main combined error of the output signal formation:
АО1: ±0,2 %
АО2: ±0,4 %
АО1: ±0,2 %
АО1: ±0,2 %
not included
Galvanic isolation:
• Full. The input is isolated from other circuits.
• Galvanic isolation voltage is not less than 500 V.
• Full. The output is isolated from other circuits.
• Galvanic isolation voltage is not less than 500 V.
• Full. The input is isolated from other circuits.
• Galvanic isolation voltage is not less than 500 V.
not included
Quantity of discrete inputs:
3
2
3
2
Trigger signal levels:
• Logical "0" signal - DISABLED state: 0-7 V
• Logical "1" signal - ON state: 18-30 V
• Logical "0" signal - DISABLED state: 0-7 V
• Logical "1" signal - ON state: 18-30 V
• Logical "0" signal - DISABLED state: 0-7 V
• Logical "1" signal - ON state: 18-30 V
• Logical "0" signal - DISABLED state: 0-7 V
• Logical "1" signal - ON state: 18-30 V
Input consumption:
≤ 10 mA
≤ 10 mA
-
-
Galvanic isolation:
• Full. The input is isolated from other circuits.
• Galvanic isolation voltage is not less than 500 V.
• Full. The input is isolated from other circuits.
• Galvanic isolation voltage is not less than 500 V.
• Full. The input is isolated from other circuits.
• Galvanic isolation voltage is not less than 500 V.
• Full. The input is isolated from other circuits.
• Galvanic isolation voltage is not less than 500 V.
Quantity of discrete outputs:
5
4
5
4
Output types:
• Transistor OK: up to 40V, 100mA
• Closing relay: up to 220V, 5A
• Transistor OK: up to 40V, 100mA
• Switching relay (DO1, DO2): up to 220V, 8A
• Solid state relay (DO1 - DO4): up to 60V, 1.0AAC/ADC
• Closing relay (DO3, DO4): up to 220V, 5A
• Transistor OK: up to 40V, 100mA
• Closing relay: up to 220V, 5A
• Transistor OK: up to 40V, 100mA
• Switching relay (DO1, DO2): up to 220V, 8A
• Solid state relay (DO1 - DO4): up to 60V, 1.0AAC/ADC
• Closing relay (DO3, DO4): up to 220V, 5A
Galvanic isolation:
• Group. The output group is isolated from other circuits.
• Galvanic isolation voltage is not less than 500 V.
• Full. The output is isolated from other circuits.
• Galvanic isolation voltage is not less than 500 V.
• Group. The output group is isolated from other circuits.
• Galvanic isolation voltage is not less than 500 V.
• Full. The input is isolated from other circuits.
• Galvanic isolation voltage is not less than 500 V.
Indication type:
Seven-segment, four-digit
Seven-segment, four-digit
Seven-segment, four-digit
Seven-segment, four-digit
Indication accuracy:
± 0,01 %
± 0,01 %
± 0,01 %
± 0,01 %
Interface type:
RS-485
RS-485
RS-485
RS-485
Data exchange protocol:
Modbus-RTU (Slave mode)
Modbus-RTU (Slave mode)
Modbus-RTU (Slave mode)
Modbus-RTU (Slave mode)
Maximum line length within one network segment:
up to 1200 meters
up to 1200 meters
up to 1200 meters
up to 1200
Galvanic isolation:
• Full. The interface is isolated from other circuits.
• Galvanic isolation voltage is not less than 500 V.
• Full. The input is isolated from other circuits.
• Galvanic isolation voltage is not less than 500 V.
• Full. The input is isolated from other circuits.
• Galvanic isolation voltage is not less than 500 V.
• Full. The input is isolated from other circuits.
• Galvanic isolation voltage is not less than 500 V.
Installation type:
Shield
Shield
Shield
Shield
Case size (HxWxD):
96х96х186 mm
96х96х186 mm
96х96х186 mm
96х96х186 mm
Installation depth:
190 mm
190 mm
190 mm
190 mm
Weight, not more than:
1.0 kg
1.0 kg
1.0 kg
1.0 kg
Degree of protection:
IP30
IP30
IP30
IP30
Supply voltage:
• Alternating current: ~ 230 (+22 V, -33 V) (50 ± 1) Hz
• Direct current: 24±4 V
• Alternating current: ~ 230 (+22 V, -33 V) (50 ± 1) Hz
• Direct current: 24±4 V
• Alternating current: ~ 230 (+22 V, -33 V) (50 ± 1) Hz
• Direct current: 24±4 V
• Alternating current: ~ 230 (+22 V, -33 V) (50 ± 1) Hz
• Direct current: 24±4 V
Power consumption:
• Alternating current: 13 VA
• Direct current: no more than 350 mA
• Alternating current: 13 VA
• Direct current: no more than 350 mA
• Alternating current: 13 VA
• Direct current: no more than 350 mA
• Alternating current: 13 VA
• Direct current: no more than 350 mA
Ambient temperature:
-40 °C to +70 °C
-40 °C to +70 °C
-40 °C to +70 °C
-40 °C to +70 °C
Premises of use:
closed explosion-proof, fire-proof
closed explosion-proof, fire-proof
closed explosion-proof, fire-proof
closed explosion-proof, fire-proof
Vibration:
with a frequency of up to 60 Hz with an amplitude of up to 0.1 mm
with a frequency of up to 60 Hz with an amplitude of up to 0.1 mm
with a frequency of up to 60 Hz with an amplitude of up to 0.1 mm
with a frequency of up to 60 Hz with an amplitude of up to 0.1 mm
Atmospheric pressure:
from 84 to 106.7 kPa
from 84 to 106.7 kPa
from 84 to 106.7 kPa
from 84 to 106.7 kPa