I/O modules
Spark protection barrier
Recorders and archivers
Meters and converters of electrical network parameters
Counters, timers, tachometers
Liquid level indicators and regulators
Programmed logical controllers
Manual signal transmitters
Technological signaling devices
Power supplies
Codesys PLC controllers
Normalizing converters
Galvanic isolation and branching blocks
Communication interface converters and amplifiers
Analytical instruments
Switching blocks
Control and protection units
GSM communication routers / modems
- Galvanic isolation unit
BRG-311
Quantity inputs:
1
Input type:
passive
Possible input signal ranges/load resistance:
0-5 mA, 0-20 mA, 4-20 mA, -5-5 mA, -20-20 mA
0-10 V, 0-100 mV, -10-10 V, -100-100 mV
Cu 50, Cu 100, Pt 50P, Pt 100P, Pt50, Pt100, Pt500, Pt1000
Type: K,L,N,J,S,R,B,T,E,A-1, A-2, A-3
0-150 Ohm, 0-300 Ohm, 0-1200 Ohm, 0-2500 Ohm
Limit of the basic combined measurement error:
± 0,2 %
Quantity outputs:
1
Output type:
active
Ranges of possible output signals/load resistance:
0 to 5 mA / R = 2000 Ohm
0 to 20 mA / R ≤ 500 Ohm
4 to 20 mA / R ≤ 500 Ohm
0 to 10 V / R ≥ 2000 Ohm
Galvanic isolation:
• Full. The output is isolated from other circuits.
• Galvanic isolation voltage is not less than 500 V.
Supply voltage:
Direct current: 24 V
Alternating current: 230 V
Power consumption:
Direct current: no more than 150 mA
Alternating current: no more than 3.7 VA
Installation type:
on DIN rail
Case size (HxWxD):
100х23х115 mm
Weight, not more than:
0,2 kg
Degree of protection:
IP20
Operating instructions BRG-311