ITM-100 is an industrial single-channel indicator - a meter designed to measure temperature, pressure, humidity, flow, level and other physical quantities in various industries (depending on the sensors that are connected).

Functional capabilities:

• measurement of temperature or other physical quantities (pressure, humidity, flow, level, etc.) using sensors with a unified output signal of current or voltage;
• digital filtering and correction of the input signal;
• scaling of the scale of each input;
• alarm function when the measured parameter goes beyond the specified range, with activation of discrete outputs;
• linear conversion of the input signal into an output analog signal of a unified type;
• indication of the measured value on a 4-digit, 7-segment display;
• the possibility of inclusion in the dispatching system and data transmission to the upper level via the RS-485 interface.

ITM-101 - industrial single-channel indicator - meter, designed for measuring temperature, pressure, humidity, flow, level and other physical quantities in various industries (depending on the sensor that is connected).

Functional capabilities:

• measurement of temperature or other physical quantities (pressure, humidity, flow, level, etc.) using sensors with a unified output signal of current or voltage;
• digital filtering and correction of the input signal;
• scaling of the scale of each input;
• alarm function when the measured parameter goes beyond the specified range, with activation of discrete outputs;
• linear conversion of the input signal into an output analog signal of a unified type;
• indication of the measured value on a 4-digit, 7-segment display and a linear indicator (bargraph) of horizontal type;
• the possibility of inclusion in the dispatching system and data transmission to the upper level via the RS-485 interface.

ITM-101V - industrial single-channel indicator - meter, designed for measuring temperature, pressure, humidity, flow, level and other physical quantities in various industries (depending on the sensor that is connected).

Functional capabilities:

• measurement of temperature or other physical quantities (pressure, humidity, flow, level, etc.) using sensors with a unified output signal of current or voltage;
• digital filtering and correction of the input signal;
• scaling of the scale of each input;
• alarm function when the measured parameter goes beyond the specified range, with activation of discrete outputs;
• linear conversion of the input signal into an output analog signal of a unified type;
• indication of the measured value on a 4-digit, 7-segment display and a linear indicator (bargraph) of vertical type;
• the possibility of inclusion in the dispatching system and data transmission to the upper level via the RS-485 interface.

ITM-310 is an industrial single-channel indicator - a meter designed to measure temperature, pressure, humidity, flow, level and other physical quantities in various industries (depending on the sensors that are connected).

Functional capabilities:

• measurement of temperature or other physical quantities (pressure, humidity, flow, level, etc.) using sensors with a unified output signal of current or voltage;
• separate measuring input for thermocouple cold junction compensation;
• digital filtering and correction of the input signal;
• scaling of the scale of each input;
• alarm function when the measured parameter goes beyond the specified range, with activation of discrete outputs;
• linear conversion of the input signal into an output analog signal of a unified type;
• indication of the measured value on a 4-digit, 7-segment display;
• the possibility of inclusion in the dispatching system and data transmission to the upper level via the RS-485 interface.

ITM-310 is an industrial single-channel indicator - a meter designed to measure temperature, pressure, humidity, flow, level and other physical quantities in various industries (depending on the sensors that are connected).

Functional capabilities:

• measurement of temperature or other physical quantities (pressure, humidity, flow, level, etc.) using sensors with a unified output signal of current or voltage;
• separate measuring input for thermocouple cold junction compensation;
• digital filtering and correction of the input signal;
• scaling of the scale of each input;
• alarm function when the measured parameter goes beyond the specified range, with activation of discrete outputs;
• linear conversion of the input signal into an output analog signal of a unified type;
• indication of the measured value on a 4-digit, 7-segment display;
• the possibility of inclusion in the dispatching system and data transmission to the upper level via the RS-485 interface.

ITM-311 is an industrial single-channel indicator - a meter designed to measure temperature, pressure, humidity, flow, level and other physical quantities in various industries (depending on the sensors that are connected).

Functional capabilities:

• measurement of temperature or other physical quantities (pressure, humidity, flow, level, etc.) using sensors with a unified output signal of current or voltage;
• separate measuring input for thermocouple cold junction compensation;
• digital filtering and correction of the input signal;
• scaling of the scale of each input;
• alarm function when the measured parameter goes beyond the specified range, with activation of discrete outputs;
• linear conversion of the input signal into an output analog signal of a unified type;
• indication of the measured value on a 4-digit, 7-segment display and a linear indicator (bargraph) of horizontal type;
• the possibility of inclusion in the dispatching system and data transmission to the upper level via the RS-485 interface.

ITM-311 is an industrial single-channel indicator - a meter designed to measure temperature, pressure, humidity, flow, level and other physical quantities in various industries (depending on the sensors that are connected).

Functional capabilities:

• measurement of temperature or other physical quantities (pressure, humidity, flow, level, etc.) using sensors with a unified output signal of current or voltage;
• separate measuring input for thermocouple cold junction compensation;
• digital filtering and correction of the input signal;
• scaling of the scale of each input;
• alarm function when the measured parameter goes beyond the specified range, with activation of discrete outputs;
• linear conversion of the input signal into an output analog signal of a unified type;
• indication of the measured value on a 4-digit, 7-segment display and a linear indicator (bargraph) of vertical type;
• the possibility of inclusion in the dispatching system and data transmission to the upper level via the RS-485 interface.

ITM-115 is an industrial single-channel indicator-measurer designed for measuring temperature, pressure, humidity, flow, level, and other physical quantities across various industrial applications (depending on the connected sensor), with indication on a digital display and a circular scale.

Functional features:

• Measurement of temperature or other physical quantities (pressure, humidity, flow, level, etc.) using sensors with a standardized current or voltage output signal;
• Digital filtering and correction of the input signal;
• Input signal scale scaling for each input;
• Alarm function when the measured parameter goes beyond the specified range, with activation of discrete outputs;
• Linear conversion of the input signal into a standardized analog output signal;
• Indication of the measured value on a 4-digit, 7-segment display and a circular (analog-style) scale;
• Integration into a supervisory control system and data transmission to the upper level via RS-485 interface.

ITM-115 is an industrial single-channel indicator-measurer designed for measuring temperature, pressure, humidity, flow, level, and other physical quantities across various industrial applications (depending on the connected sensor), with indication on a digital display and a circular scale.

Functional features:

• Measurement of temperature or other physical quantities (pressure, humidity, flow, level, etc.) using sensors with a standardized current or voltage output signal;
• Digital filtering and correction of the input signal;
• Input signal scale scaling for each input;
• Alarm function when the measured parameter goes beyond the specified range, with activation of discrete outputs;
• Linear conversion of the input signal into a standardized analog output signal;
• Indication of the measured value on a 4-digit, 7-segment display and a circular (analog-style) scale;
• Integration into a supervisory control system and data transmission to the upper level via RS-485 interface.

ITM-110 is a single-channel industrial indicator–measuring device designed for measuring temperature, pressure, humidity, flow, level, and other physical quantities in various industrial applications (depending on the connected sensor).

Functional features:

• Measurement of temperature or other physical quantities (pressure, humidity, flow, level, etc.) using sensors with a standardized current or voltage output signal. Sensor type can be changed, calibration is required;
• Digital filtering and input signal correction;
• Scaling of the measurement range for each input;
• Alarm function when the measured parameter goes beyond the specified range, with activation of discrete outputs;
• Linear conversion of the input signal into a standardized analog output signal;
• Indication of the measured value on a 4-digit, 7-segment display;
• Integration into a dispatching system and data transmission to the upper level via RS-485 interface. Both Slave and Master modes are supported (can poll other devices via Modbus RTU protocol).

ITM-110 is a single-channel industrial indicator–measuring device designed for measuring temperature, pressure, humidity, flow, level, and other physical quantities in various industrial applications (depending on the connected sensor).

Functional features:

• Measurement of temperature or other physical quantities (pressure, humidity, flow, level, etc.) using sensors with a standardized current or voltage output signal. Sensor type can be changed, calibration is required;
• Digital filtering and input signal correction;
• Scaling of the measurement range for each input;
• Alarm function when the measured parameter goes beyond the specified range, with activation of discrete outputs;
• Linear conversion of the input signal into a standardized analog output signal;
• Indication of the measured value on a 4-digit, 7-segment display;
• Integration into a dispatching system and data transmission to the upper level via RS-485 interface. Both Slave and Master modes are supported (can poll other devices via Modbus RTU protocol).

ITM-110 is a single-channel industrial indicator–measuring device designed for measuring temperature, pressure, humidity, flow, level, and other physical quantities in various industrial applications (depending on the connected sensor).

Functional features:

• Measurement of temperature or other physical quantities (pressure, humidity, flow, level, etc.) using sensors with a standardized current or voltage output signal. Sensor type can be changed, calibration is required;
• Digital filtering and input signal correction;
• Scaling of the measurement range for each input;
• Alarm function when the measured parameter goes beyond the specified range, with activation of discrete outputs;
• Linear conversion of the input signal into a standardized analog output signal;
• Indication of the measured value on a 4-digit, 7-segment display;
• Integration into a dispatching system and data transmission to the upper level via RS-485 interface. Both Slave and Master modes are supported (can poll other devices via Modbus RTU protocol).

ITM-120 is a single-channel industrial indicator–measuring device designed for measuring temperature, pressure, humidity, flow, level, and other physical quantities in various industrial applications (depending on the connected sensor).

Functional features:

• Measurement of temperature or other physical quantities (pressure, humidity, flow, level, etc.) using sensors with a standardized current or voltage output signal. Sensor type can be changed, calibration is required;
• Digital filtering and input signal correction;
• Scaling of the measurement range for each input;
• Alarm function when the measured parameter goes beyond the specified range, with activation of discrete outputs;
• Linear conversion of the input signal into a standardized analog output signal;
• Indication of the measured value on a 4-digit, 7-segment display;
• Integration into a dispatching system and data transmission to the upper level via RS-485 interface. Both Slave and Master modes are supported (can poll other devices via Modbus RTU protocol).

ITM-122 is a single-channel industrial indicator–measuring device designed for measuring temperature, pressure, humidity, flow, level, and other physical quantities in various industrial applications (depending on the connected sensor).

Functional features:

• Measurement of temperature or other physical quantities (pressure, humidity, flow, level, etc.) using sensors with a standardized current or voltage output signal. Sensor type can be changed, calibration is required;
• Digital filtering and input signal correction;
• Scaling of the measurement range for each input;
• Alarm function when the measured parameter goes beyond the specified range, with activation of discrete outputs;
• Linear conversion of the input signal into a standardized analog output signal;
• Indication of the measured value on a 4-digit, 7-segment display;
• Integration into a dispatching system and data transmission to the upper level via RS-485 interface. Both Slave and Master modes are supported (can poll other devices via Modbus RTU protocol).

ITM-122Т is a single-channel industrial indicator–measuring device designed for measuring temperature, pressure, humidity, flow, level, and other physical quantities in various industrial applications (depending on the connected sensor).

Functional features:

• Measurement of temperature or other physical quantities (pressure, humidity, flow, level, etc.) using sensors with a standardized current or voltage output signal. Sensor type can be changed, calibration is required;
• Digital filtering and input signal correction;
• Scaling of the measurement range for each input;
• Alarm function when the measured parameter goes beyond the specified range, with activation of discrete outputs;
• Linear conversion of the input signal into a standardized analog output signal;
• Indication of the measured value on a 4-digit, 7-segment display;
• Integration into a dispatching system and data transmission to the upper level via RS-485 interface. Both Slave and Master modes are supported (can poll other devices via Modbus RTU protocol).

ITM-320 is a dual-channel industrial indicator-measurer designed for simultaneous measurement, display, data logging, and remote monitoring of up to four technological parameters: temperature, pressure, humidity, flow, level, and other physical quantities across various industrial applications (depending on the connected sensor). It provides output control signals and remote access via a web interface.

⚙️ Functional Features:

📊 Measurement & Indication:

• 2 independent universal inputs for measuring temperature or other physical quantities (pressure, humidity, flow, level, etc.) using sensors with standardized current or voltage output. Changing the sensor type does not require recalibration.
• Real-time value display on a digital screen.
• Input range scaling for each channel.
• Digital filtering and signal correction.

💾 Data Logging:

• Archiving data to a microSD card in CSV format.
• Saving to separate files sorted by date.
• Configurable logging interval and built-in real-time clock.

🌐 Web Interface:

• Remote viewing of current values and export of archived data.
• Device parameter configuration.

🚨 Alarm Functionality:

• Alarm on exceeding preset parameter limits with triggering of discrete outputs.
• Linear conversion of the input signal to a standardized analog output signal.

🔄 Additional Features:

• Mathematical functions.
• Interfaces: RS-485, USB, Ethernet.
• Protocols: Modbus RTU, Modbus TCP.

ITM-320A is a dual-channel industrial indicator-measurer designed for simultaneous measurement, display, data logging, and remote monitoring of up to four technological parameters: temperature, pressure, humidity, flow, level, and other physical quantities across various industrial applications (depending on the connected sensor). It provides output control signals and remote access via a web interface.

⚙️ Functional Features:

📊 Measurement & Indication:

• 2 independent universal inputs for measuring temperature or other physical quantities (pressure, humidity, flow, level, etc.) using sensors with standardized current or voltage output. Changing the sensor type does not require recalibration.
• Real-time value display on a digital screen, digital 5 digits.
• Input range scaling for each channel.
• Digital filtering and signal correction.

💾 Data Logging:

• Archiving data to a microSD card in CSV format.
• Saving to separate files sorted by date.
• Configurable logging interval and built-in real-time clock.

🌐 Web Interface:

• Remote viewing of current values and export of archived data.
• Device parameter configuration.

🚨 Alarm Functionality:

• Alarm on exceeding preset parameter limits with triggering of discrete outputs.
• Linear conversion of the input signal to a standardized analog output signal.

🔄 Additional Features:

• Mathematical functions.
• Interfaces: RS-485, USB, Ethernet.
• Protocols: Modbus RTU, Modbus TCP.

ITM-322 is a dual-channel industrial indicator-measurer designed for simultaneous measurement, display, data logging, and remote monitoring of up to four technological parameters: temperature, pressure, humidity, flow, level, and other physical quantities across various industrial applications (depending on the connected sensor). It provides output control signals and remote access via a web interface.

⚙️ Functional Features:

📊 Measurement & Indication:

• 2 independent universal inputs for measuring temperature or other physical quantities (pressure, humidity, flow, level, etc.) using sensors with standardized current or voltage output. Changing the sensor type does not require recalibration.
• Real-time value display on a digital screen, digital 5 digits.
• Input range scaling for each channel.
• Digital filtering and signal correction.

💾 Data Logging:

• Archiving data to a microSD card in CSV format.
• Saving to separate files sorted by date.
• Configurable logging interval and built-in real-time clock.

🌐 Web Interface:

• Remote viewing of current values and export of archived data.
• Device parameter configuration.

🚨 Alarm Functionality:

• Alarm on exceeding preset parameter limits with triggering of discrete outputs.
• Linear conversion of the input signal to a standardized analog output signal.

🔄 Additional Features:

• Mathematical functions.
• Interfaces: RS-485, USB, Ethernet.
• Protocols: Modbus RTU, Modbus TCP.

ITM-304 is a four-channel industrial indicator-measurer designed for simultaneous measurement, display, data logging, and remote monitoring of up to four technological parameters: temperature, pressure, humidity, flow, level, and other physical quantities across various industrial applications (depending on the connected sensor). It provides output control signals and remote access via a web interface.

⚙️ Functional Features:

📊 Measurement & Indication:

• 4 independent universal inputs for measuring temperature or other physical quantities (pressure, humidity, flow, level, etc.) using sensors with standardized current or voltage output. Changing the sensor type does not require recalibration.
• Real-time value display on a digital screen.
• Input range scaling for each channel.
• Digital filtering and signal correction.

💾 Data Logging:

• Archiving data to a microSD card in CSV format.
• Saving to separate files sorted by date.
• Configurable logging interval and built-in real-time clock.

🌐 Web Interface:

• Remote viewing of current values and export of archived data.
• Device parameter configuration.

🚨 Alarm Functionality:

• Alarm on exceeding preset parameter limits with triggering of discrete outputs.
• Linear conversion of the input signal to a standardized analog output signal.

🔄 Additional Features:

• Mathematical functions.
• Interfaces: RS-485, USB, Ethernet.
• Protocols: Modbus RTU, Modbus TCP.

ITM-304 is a four-channel industrial indicator-measurer designed for simultaneous measurement, display and remote monitoring of up to four technological parameters: temperature, pressure, humidity, flow, level, and other physical quantities across various industrial applications (depending on the connected sensor). It provides output control signals.

⚙️ Functional Features:

📊 Measurement & Indication:

• 4 independent universal inputs for measuring temperature or other physical quantities (pressure, humidity, flow, level, etc.) using sensors with standardized current or voltage output. Changing the sensor type does not require recalibration.
• Real-time value display on a digital screen.
• Input range scaling for each channel.
• Digital filtering and signal correction.

🚨 Alarm Functionality:

• Alarm on exceeding preset parameter limits with triggering of discrete outputs.
• Linear conversion of the input signal to a standardized analog output signal.

🔄 Additional Features:

• Mathematical functions.
• Interfaces: RS-485.
• Protocols: Modbus RTU.

MTR-138 is an industrial-grade eight-channel digital indicator and controller designed for simultaneous measurement, indication, control, and remote monitoring of up to eight technological parameters such as temperature, pressure, humidity, flow, level, and other physical values (depending on the connected sensor). It provides output control signals for process automation.

⚙️ Functional Capabilities:

📊 Measurement and Indication:

• 8 independent universal group-type inputs for measuring temperature or other physical parameters (pressure, humidity, flow, level, etc.) using sensors with a standardized current or voltage output signal. Sensor type change requires recalibration.
• Real-time value display on a digital LED screen
• Individual input signal scaling for each channel
• Digital signal filtering and correction

🚨 Alarm Functions:

• Alarm triggering when measured parameters exceed configured limits, activating discrete outputs
• Linear conversion of the input signal into a standardized analog output signal

🔄 Additional Features:

• Built-in mathematical functions
• Communication interface: RS-485
• Supported protocols: Modbus RTU

🔁 Control Functions:

• Built-in control algorithms
• ON/OFF control – basic threshold-based control for relays, valves, etc.
• PID control – smooth and stable regulation of analog and discrete actuators

ІTМ-16 is an industrial-grade sixteen-channel digital indicator and controller designed for simultaneous measurement, indication, control, and remote monitoring of up to eight technological parameters such as temperature, pressure, humidity, flow, level, and other physical values (depending on the connected sensor). It provides output control signals for process automation.

⚙️ Functional Capabilities:

📊 Measurement and Indication:

• 16 independent universal group-type inputs for measuring temperature or other physical parameters (pressure, humidity, flow, level, etc.) using sensors with a standardized current or voltage output signal. Sensor type change requires recalibration.
• Real-time value display on a digital LED screen
• Individual input signal scaling for each channel
• Digital signal filtering and correction

🚨 Alarm Functions:

• Alarm triggering when measured parameters exceed configured limits, activating discrete outputs
• Linear conversion of the input signal into a standardized analog output signal

🔄 Additional Features:

• Built-in mathematical functions
• Communication interface: RS-485
• Supported protocols: Modbus RTU

🔁 Control Functions:

• Support for expansion modules to increase signaling channels;
• Built-in control algorithms
• ON/OFF control – basic threshold-based control for relays, valves, etc.
• PID control – smooth and stable regulation of analog and discrete actuators

ІTМ-16Н is an industrial-grade sixteen-channel digital indicator and controller designed for simultaneous measurement, indication, control, and remote monitoring of up to eight technological parameters such as temperature, pressure, humidity, flow, level, and other physical values (depending on the connected sensor). It provides output control signals for process automation.

⚙️ Functional Capabilities:

📊 Measurement and Indication:

• 16 independent universal group-type inputs for measuring temperature or other physical parameters (pressure, humidity, flow, level, etc.) using sensors with a standardized current or voltage output signal. Sensor type change requires recalibration.
• Real-time value display on a digital LED screen
• Individual input signal scaling for each channel
• Digital signal filtering and correction

🚨 Alarm Functions:

• Alarm triggering when measured parameters exceed configured limits, activating discrete outputs
• Linear conversion of the input signal into a standardized analog output signal

🔄 Additional Features:

• Built-in mathematical functions
• Communication interface: RS-485
• Supported protocols: Modbus RTU

🔁 Control Functions:

• Support for expansion modules to increase signaling channels;
• Built-in control algorithms
• ON/OFF control – basic threshold-based control for relays, valves, etc.
• PID control – smooth and stable regulation of analog and discrete actuators

The ITM-110C is a single-channel digital indicator designed to display a technological parameter received via the RS-485 interface using the Modbus RTU protocol in Master mode.

🔧 Key Features:

•  ✅ Data polling via RS-485 (Modbus RTU protocol, Master mode),
•  ✅ Display of the parameter value on a 4-digit LED display,
•  ✅ Configuration of device address, baud rate, and frame parameters (start/stop bits, parity),
•  ✅ Custom register address for polling (Modbus register number),
•  ✅ Non-volatile memory for saving settings in case of power loss,
•  ✅ Compact panel-mount design (standard cutout size: 96×48 mm).

ITM-4C is a digital multichannel indicator designed for remote display of up to 8 parameters received from external devices via the RS-485 interface, using the Modbus RTU protocol in Master mode.

The device performs periodic polling of the specified devices, reads values from configured registers, and displays them on a built-in 4-digit LED indicator.

🔧 Key Features:

• ✅ Polling of up to 8 independent Modbus devices or 8 registers of a single device
• ✅ Simultaneous display of 4 independent values on the screen
• ✅ Individual configuration for each channel:
  • Slave device address
  • Register type: Holding or Input
  • Register number (address)
  • Data type: INT, UINT, FLOAT, WORD-swapped
• ✅ Visual alarm indication:
  • Status LEDs
  • Symbols or indicators on the display when a value exceeds limits
• ✅ Device configuration via:
  • Front panel control buttons
  • RS-485 interface
• ✅ All parameters are stored in non-volatile memory
• ✅ Optional: alarm outputs — relay or transistor type