Touch operator panels Weintek
I/O modules
Spark protection barrier
Recorders and archivers
Meters and converters of electrical network parameters
Counters, timers, tachometers
Liquid level indicators and regulators
Programmed logical controllers
Manual signal transmitters
Technological signaling devices
Power supplies
Codesys PLC controllers
Galvanic isolation and branching blocks
Communication interface converters and amplifiers
Analytical instruments
Switching blocks
Control and protection units
GSM communication routers / modems
- Interface conversion block RS-485/Ethernet
BPI-52
BPI-54
BPI-452
SDS-485
Operating modes:
RealCOM - virtual COM port
RealCOM - virtual COM port
RealCOM - virtual COM port
RealCOM - virtual COM port
TCP Client
TCP Server
Interface type 1:
USB
USB
USB
Ethernet, RJ-45
Maximum data transfer rate:
12 Mbps
12 Mbps
12 Mbps
10/100 Mbps
Maximum length of communication line, m:
3
3
3
40
Maximum number of devices, pcs:
1
1
1
1
Interface type 2:
RS-485
RS-422/RS-423
RS-485
4xRS-485
RS-485
RS-485
Maximum data transfer rate:
up to 115200 bps
RS-422, RS-422A: 10000 kbit/s
RS-423: 100 kbit/s
RS-485: up to 115200 bps
Each RS-485: up to 115200 bps
up to 230400 bps
Maximum length of communication line, m:
up to 1200m, at a speed of 9600 bps
RS-422, RS-422A: up to 1200m, at a speed of 90 kbit/s
RS-423: up to 1200m, at a speed of 1 kbit/s
RS-485: up to 1200m, at a speed of 9600 bps
Each RS-485: up to 1200m, at a speed of 9600 bps
up to 1200m, at a speed of 9600 bps
Maximum number of devices, pcs:
up to 32
up to 32
Each RS-485: up to 32
up to 32
Line type:
two-wire
four-wire
two-wire
two-wire
Supply voltage:
from USB
from USB
from USB
Direct current: 24 V
Alternating current: no more than 5VA
Power consumption:
no more than 65 mA
no more than 65 mA
no more than 150 mA
Direct current: no more than 65 mA
Alternating current: no more than 2VA
Galvanic isolation:
• Full. All components of the device are isolated from each other.
• Galvanic isolation voltage is not less than 500 V.
• Full. All components of the device are isolated from each other.
• Galvanic isolation voltage is not less than 500 V.
• Full. All components of the device are isolated from each other.
• Galvanic isolation voltage is not less than 500 V.
• Full. All components of the device are isolated from each other.
• Galvanic isolation voltage is not less than 500 V.
Installation type:
on DIN rail
on DIN rail
on DIN rail
on DIN rail
Case size (HxWxD):
76х26х115 mm
76х26х115 mm
76х26х115 mm
76х26х115 mm
Weight, not more than:
0,13 kg
0,13 kg
0,13 kg
0,13 kg
Degree of protection:
IP30
IP30
IP30
IP30
Ambient temperature:
-40 °C to +70 °C
IP30
-40 °C to +70 °C
-40 °C to +70 °C
-40 °C to +70 °C